Hello,
All of the sudden, I am getting a major air leak from on top of the machine. I cannot find it as it may be in the casting. It sounds like it is coming from behind the Z axis motor. There is...
Type: Posts; User: sboyle
Hello,
All of the sudden, I am getting a major air leak from on top of the machine. I cannot find it as it may be in the casting. It sounds like it is coming from behind the Z axis motor. There is...
Hello, I am having a problem cutting 3/8" plate. I am running a Thermal Dynamics A120. I replaced all consumables. It seems to pierce but then goes into a short. I just ran 12 ga with no issues. Now...
Hello,
I have a Mazak VTC-41 with Mazatrol control that I was thinking of selling in order to get a larger travel machine. I was just wondering what you guys think it is worth. The machine is in...
Good Morning John,
The hydraulics check out. One hose is pressurized while the other has none and vice versa. John, Do you think I should pull the cylinder and check it out, and clean it? Is...
Another thing I noticed. I removed the cover on the side of the turret. When I clamp and unclamp the hoses going to the cylinder move somewhat "violently". I compared this to the spindle and it is...
Thanks John,
Are you talking about the cylinder with the pistons that push on the tool clamping device? If so, any idea how to get to this? The clamping does seem simple, but I guess I am wrong. ...
I apologize for jumping on this thread. First I thought I had the same problem and changed the solenoid. However it was not the problem. Maybe someone can help me. My tools are not clamping tight. I...
Hello,
I just hooked up a Matsuura MC-1000VS machine that we purchased. Everything seems to work except, the spindle will not turn on. In MDI mode, the spindle orientation will work, but the...