Hey Bob, Ive been soaking and beating and slowly getting it to move, thats the one place that got rusted on the machine while in storage, spindle bearings got rusted to... One thing im wondering that...
Type: Posts; User: markbanman17
Hey Bob, Ive been soaking and beating and slowly getting it to move, thats the one place that got rusted on the machine while in storage, spindle bearings got rusted to... One thing im wondering that...
Hey bob, thanks! That's a load of valuable information. Okay greasing the spindle I feel pretty good about, bearings will be here in a couple days and I will check the preload you talked about.
...
Greetings,
I recently tore apart my spindle on a mill I got, It had been sitting sometime. Its a Milltronics Partner 1D (The bearings had rusted inside an Im doing a Yaskawa Retrofit)I have not...
If I'm understanding right your board uses 24v to see the signal and your switch only puts out 5v? If so I've used these as an easy cheap solution to shift the voltage ...
Hey is this still a problem?
Ran into a similar situation, the spindle is controlled over com port, new PC might mean com port is sent wrong in communication driver, are you fimilar how to change...
I recently ran into the same decision you are in with a Milltronics partner 1 from 1990,I went with retrofit for several reasons. I can by a sigma 3 yaskawa Ac servo and drives (SGDS single phase...
I've personally had great luck with my ethernet smooth steppers from warp9 with the C25 BOB. If that's in your budget I don't know. Then your also commiting to buying mach3 or 4 license
Hey, I'm a cnc programmer at a woodworking shop, we have 3 busellato 4x9. Im in the process of building my of building my own 2x3 at home using steppers with mach 3