Instead of solid copper ground, what should I use? I plan to run the wire from the VFD to motor in conduit. I'll also run the hot to the R & T as several people I've read state to do that as well.
...
Type: Posts; User: Psychbiker
Instead of solid copper ground, what should I use? I plan to run the wire from the VFD to motor in conduit. I'll also run the hot to the R & T as several people I've read state to do that as well.
...
My 4kw huanyang popped the other day and I wasn't even using the tool connected to it.
It's wired to a 5hp planer. I use the dryer outlet an plug and unplug the cord to essentially turn the VFD...
I had a 4kw hunayang hooked up for about 10 months, only used occasionally on a 5hp planer, and it popped recently, loud pop and no longer works. Pics of my hook up below.
Ground (green) to...
Yes. That's the far left green wire coming from my dryer outlet (power). There's also a ground wire underneath that that goes to the frame of planer.
I don't understand what you mean by my wiring is wrong. If you can explain in more detail. He is my explanation of wiring below.
The planer worked, powered up, ran several hundred feet of wood...
I have a 4kw Huanyang VFD, single phase in to a 5hp old planer. I only have a one 220v out let in my garage, a 30amp dryer outlet, that is used by several tools.
I typically flip the breaker off,...
Yeah, the switch is on the machine, then goes to a box that says (reset) then to the motor.
Pic of motor tag. I'd like to run it at it's full 3400rpm. Pic of similar machine below. Mine is belt...
Hi Guys,
I came across this thread searching "HY04D023B" as that's the VFD that I ordered. I plan to use this for a 5hp 3 phase old planer.
I haven't even ran wire to mine yet. I would like...