Gerry Thanks, That's a possibility, but i would suspect it would at least be .25" deep, and then a bit more due to any air leak. but its commanded to .25" deep and it may route at 0.126" and go from...
Type: Posts; User: WWWOODMAN
Gerry Thanks, That's a possibility, but i would suspect it would at least be .25" deep, and then a bit more due to any air leak. but its commanded to .25" deep and it may route at 0.126" and go from...
With ALL machinery off, i hear no air leak. once a routing operation is complete on one panel, and the next part is ran. it will continue on the lowering path, from the depth of the last route, after...
Machine just started inadvertently routing at the wrong depth.I home the machine and plow the top and bottom of a wall end for a cabinet. the route starts at a certain depth. Not necessarily the...
I have been machining thermofused melamine on 3/4" particle board cabinet parts for years on my point to point machine. I only recently started having problems with chipping on the edge of most every...
THANKS FOR THE INFO GUY'S
I Have located myself some acme 1/2" 10 tpi leadscews, and have abandoned the 1/4X20 thread idea.
I am looking at the gecko 540 control, and it states that I must find a...
HOWDY from Tx.
I am building a Gantry style router @ 24X48. Using a porter cable #7301 laminate trim router.
I am as green as a gourd, and need help to determine the best buy,and best size stepper...