510,093 active members
2,912 visitors online
Register for free
Login

Search:

Type: Posts; User: The Engine Guy

Page 1 of 20 1 2 3 4

Search: Search took 0.01 seconds.

  1. Re: Bobcad shuts down upon attempting to open a file

    If you are the "Administrator" for the PC/Network try removing the offending User and then either try re-creating that User Name or create a new one. Or have you tried setting BobCAD to "Run as...
  2. Replies
    2
    Views
    129

    Re: V30 Lathe

    Do you have a proper "Crib" setup for each program with the tools for that program in it and do you also have the Automatic Tool numbering unchecked, if so then your tool numbers should not change in...
  3. Replies
    2
    Views
    200

    Re: Bobcad Cam Lathe V32

    Yes, however that would have to be a single "Basic Finish" strategy, see image below.
    https://www.cnczone.com/forums/attachment.php?attachmentid=432314&stc=1...
  4. Replies
    3
    Views
    278

    Re: HSM Advisor Question

    The first place to get information on feeds and speeds would be either the tool rep or tool manufacturer you bought the tool from, I have found over the years they are the people that really do know...
  5. Replies
    1
    Views
    18

    Re: Bobcad file conversion

    I have BobCAD V28 which will open 21 .cad files so if you want to send me some files I will have a go at opening and re-saving as .dxf files, depending on what software you are using now I should be...
  6. Re: Hartford Pro1000a with Mitsubishi Meldas M64 post processor

    Hi Jason

    There is a Post Processor that is specific to the Mitsubishi Meldas control for Fusion 360,
    I have attached it in a Zip file for you, just open the Zip file and copy and paste the Post...
  7. Replies
    4
    Views
    274

    Re: V32 CAM Tree Flyouts

    Hi Al
    Yes, I am with the way it allows users to edit/display settings, to be fair I haven`t downloaded a Demo version of V32 so it is a bit of educated guesswork on my part, to me just displaying...
  8. Replies
    1
    Views
    120

    Re: Hsmworks basic question

    Looks like you have different versions, some where along the way updates may have been missed on the computers that are different.

    Having said that it looks as though the "Pocket" strategy is...
  9. Re: A working post processor from Fusion 360 to .mmg?

    Here is an image of the Posting Dialog where I have highlighted it showing that the extension is indeed .mmg

    Does it not show as this in your Fusion Posting Dialog ??
  10. Re: A working post processor from Fusion 360 to .mmg?

    OK, which PP are we talking about?

    The one I uploaded for you to try out earlier or some other one?

    Have you opened the 9292 Zip file I uploaded for you on my last post? If not why not ? It is...
  11. Re: A working post processor from Fusion 360 to .mmg?

    Hi, sorry but I am not sure exactly what you are trying to do, you are mentioning a .nc file and I don`t see that extension used anywhere, did you not open the file
    I posted earlier and try out the...
  12. Replies
    4
    Views
    274

    Re: V32 CAM Tree Flyouts

    Nick

    Well I suppose it is in a way as you can now "dump" the CAD tree from what I hear, as you are aware if it has taken many CAD ops that does greatly increase the file size but it is a case of...
  13. Replies
    3
    Views
    93

    Re: Fusion 360 multple setups

    As you haven`t said what control or Post Processor you are using or if you are doing the same operation on the second side this is all I have for you for now.

    When you come to Post out your G code...
  14. Replies
    15
    Views
    676

    Re: Bobcad version 21

    Thanks for that, should speed things up for David.

    Regards
    Rob
  15. Replies
    15
    Views
    676

    Re: Bobcad version 21

    David
    Send a PM tp Malish and ask him for a copy of the file I sent him and also what if any problems he had installing on W10.

    I am not at the computer where I have the V21 files stored and...
  16. Replies
    10
    Views
    290

    Re: Fusion slotting

    Maybe this will help a little, if you are just doing one at a time for now then probably the easiest strategy to use would be the "Trace" as it will just put the centre of the tool on a line you draw...
  17. Re: A working post processor from Fusion 360 to .mmg?

    P.S. Here is the Laguna Post edited to output with the .mmg extension.
    I have tested the PP in my Predator Text Editor using the "Compare" facility with it set to both .prg and .mmg extensions and...
  18. Re: A working post processor from Fusion 360 to .mmg?

    How did Autodesk tell you to change the file extension from .prg to .mmg ?
    Did you do it by just changing the extension on the nc file or did you/they make the change in the Post Processor so that...
  19. Replies
    2
    Views
    54

    Re: STL files are not visible

    It is possibly there but it may be the same colour as the background and will be in Top view, try selecting an ISO view and also try using the "Select All" facility, if nothing shows then there is no...
  20. Re: BobCad-Cam v23 Post Processor for Mach3 Syil X6

    Zip file attached containing an original version from 2009 of the Mach3 No ATC Post Processor.

    Hope it is of some use :D :D

    Regards
    Rob
  21. Replies
    6
    Views
    81

    Re: Can you cut this on a 4th axis??

    Didn`t know it was a challenge, is there a prize ?? :D :D :D :D :D

    Few of these would do it :cheers:

    Although come to think of it most stuff seems to be a challenge with Fusion 360 :D
    ...
  22. Replies
    6
    Views
    81

    Re: Can you cut this on a 4th axis??

    I agree with all the other posters, such a job would be easiest done with a simple contour and a rounding cutter, just pop it in a vise and a couple of rough and finish passes and job done.

    Yes it...
  23. Replies
    4
    Views
    286

    Re: need bobCAD help..... again.....

    @jaydizzle

    Hmmm, seems to work fine here after changing to a Spiral lead in using my Demo V31, as my files can`t be opened in any licensed version all I can offer if it is of any help is the Video...
  24. Replies
    7
    Views
    157

    Re: CAM model to level sacrificial bed

    The whole reason for having the G28 G91 Z0 line is for SAFETY, but it only works if the user has correctly setup their machine and it has been correctly "Homed".

    Regardless of where the machine is...
  25. Replies
    17
    Views
    366

    Re: BobCad Corp. are Thieves!!!!!

    I have already suggested several options for John to pursue so may I respectfully ask you to either pick one or two of the ones I put forward or put forward one or more of your own for John to mull...
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4