so e.g.
pick up part full length for e.g. 3 pieces
Peg out parts with zero point offset (e.g. write)
After the 3x pegging out, the program should write me the 3 pieces into the piece counter.
Or...
Type: Posts; User: dgsp
so e.g.
pick up part full length for e.g. 3 pieces
Peg out parts with zero point offset (e.g. write)
After the 3x pegging out, the program should write me the 3 pieces into the piece counter.
Or...
Well for that I can also insert our piece counter at the end e.g. 50 and then the machine also stops with the error “overvalue in piece counter”,
No, I am only interested in the command for the...
lb30mw
ospu10-l
hi @all
Is it’s possible to program the piece counter with the controller. If possible without subprogram.
We mainly process parts where 3 rods are peged out after each...
Ingenious but it was quick
It’s a sinumerik 810 with shopmill
But the serial gateway isn’t fully connected.
Hello
Does anybody have the pin assignment for data transfer (serial data cable)?
Thanks
25pin at the machine and 9pin at the pc
Ok, thanks
Hello @all
How should I program a plan thread per one touch (admac parts)?
Outer diameter 100
Thickness 20