Search:

You need "Macro". What kind of machine do you have? if you have a system 18, you probally should have macro. Check screen if you could find any button named "macro" or "var" for variables under the...

This must be a bug.
I have MC X2 and the most files are on a network drive. The weird is that more than one can open the same file without knowing that is already in use by another one. If the...

It could also be a parameter issue. Check the parameter that is descrabing the device you are using. Example Fanuc PPR, Bubble, ans so on.

Not all cnc system accept the Radius "R" only. And the use of I and J instead of the "R" is faster to process for the control than the "R" command.
In high speed milling it is a big differens. But...

I not sure I understand you, but changeing the option parameters is something you shouden't do, if you are not sure what will will happend. Do you have have a backup made on boot level? If you have...

In a Fanuc sytem 18 there is a page in the controler where you can tune the AICC or HPCC. You set min values and max valuses and then you can use the "R1 to R10" in the program to set how fast yoy...

If you send me you email-adress, I can send you the High Speed Cutting manual from Fanuc. But it is about 3mb so I can't post it here.

I think this is a cable or parameter issue. First check the type of handshake in your setp of the pc and cnc. Use hardware handshake instead of using XON/XOFF. If you are using DTR (Data Terminal...

If you have the macro option and understand it well, it's possible the make a program that print out a series of program.

There is no locked parameter in system 6, just turn on the parameter switch in the cabinett and you can change them.

Just do a search on the Google and you will find lots of hits.

Regards Per

Kluber Isoflex NBU15
Don't put in to much grease beacuse the bearings will go hot. Usually no more then 30% of the free area should be filled with grase. Check your bearing data.

I'm usally working with AlphaCam and are now testing EdgeCam. When working whith parts at a tombstone i usally move the tombstone to the exact position that I have in the machine. When rotating to...

Have you ever heard of something could Nc-Editor or change of postprocessor.

I don't want to be rood, but this is Sunday school programming.
Study the manual some more before you get into to this...

Your wrong. The Z path would be change the amount that you put in the #2. But I see that I have forgotten one thing, you also have to put in third parameter that keeps track of the previos cut.
Like...

If i get your question right, you wan't to repeat the same path a number of times. But change only the Z value. If this is correct the my loop will work perfectly if you understand what I ment.
...

Suggest.
Make a loop.
Set #1=0 (Loop counter)
Set #2=1 (Cutting depth)
While #1 LE 12 DO 1 (Something like this, not sure)
your countour comes here, and change all your Z levels to
Z[your...