Hi guys,
This is just an FYI, I got called in to a friend's shop because his "brand-new-NOS-Yaskawa-still-in-the-box" SGDB-ADG drive wouldn't work. Subsequent investigation (we disassembled the...
Type: Posts; User: rootboy
Hi guys,
This is just an FYI, I got called in to a friend's shop because his "brand-new-NOS-Yaskawa-still-in-the-box" SGDB-ADG drive wouldn't work. Subsequent investigation (we disassembled the...
I'll pass that along to my friend. He's got two or three that have gone belly up and need repair. The panels that these were mounted in have no cooling or air filtration. We plan on fixing that.
...
One would hope so. I read the manual as those settings are for the source for controlling the drive, not programming it.
The manual mentions an external keyboard, but doesn't elaborate. But I...
Hmm, it made sense to me, but I've commissioned dozens of these kinds of drives. Mostly AB, GE, and Cutler-Hammer, with a smattering of Robicon, Yaskawa, and Fanuc. But like I said, I don't have this...
It turns out that the drive doesn't like to run lying down. :)
Hi guys,
We're testing out the spindle drive and we've run into a problem, the old Servopack CPCR-QR drive requires a speed reference and a run command. So I apply a few volts on terminals 1 & 2,...
Hi guys,
Does anyone have a Servopack CPCR-MR-054 manual? Specifically the connections to the two 2x10 JAE connectors at the top? I've got the TSE-C717-13E.pdf manual which specifically covers the...
Just an update, but it's a 5 VDC encoder. If I remember to I'll get a list of which terminal does what.
No, it uses a 50 pin SCSI connector. But that appears to have been the handiest connector available to them at the time. It certainly doesn't need anywhere near that many pins.
Looking at my...
Hi guys,
The first question is "How do you want to control it?".
This is coming from someone who doesn't own one of these inverters, nor has ever set this particular one up, but has set up...
And the USDigital converters are on their way. Should be here Friday. Now where did I put those Zeners? :)
And I did scope out the power supply, and it is putting out a paltry 100 - 150 mV of...
Just an update, I contacted USDigital and the device that I would want to use is a:
EA-D-H-10-W5 About $70 each.
For others reading this in the future, keep in mind that this device is for a 5...
Hi Karl!,
I have an Elenco Model LP-560 that I have never taken out of the packaging. So much for the 5 year warranty... But, what the heck?, it's about time that it has earned its keep. :) I...
Hi Jim,
It's the Adlink PCI-8136 card.
Thanks!,
John
Hi, thanks for your response. :)
Yes, I saw where the CS16600 card (Adlink PCI-8136) can do either. And the encoder that is giving us trouble is a single-ended encoder with A+, B+, and I+ (what I...
Hi guys,
We're having some trouble reading the X and Z axis encoders on our lathe.
The encoders for the X and Z axis servos are Yaskawa TFUE-25ZC7 encoders, which are single-ended encoders with...
Hi guys,
Does anyone have the specs on a Kuroda PC-1024ZL-WFT-68 encoder?
I was hoping to be able to open it up for a look, but it's O-Ring ain't having none of it (and it sorta has to come...
Thanks Jim :)
I've been re-creating the prints as I go, and it is already paying off with telling me how I am going to have to connect the CamSoft controller. That, and it will make life easier...
I have several retro computers, and the go to device for a floppy replacement is a Gotek floppy emulator. You can get them for around $30, but be sure that you get one that is compatible with your...
Well, I feel like an idiot...
When the owner got home from work today, I explained the situation, and he poked his head into the machine to look for a place to mount an encoder, and asked, "What's...
Hi guys,
I'm upgrading an old Takamatsu lathe with a Yasnac 2000G controller to CamSoft for a friend.
The drive is a Servopack CPCR-QR756S and in uses a resolver mounted on the motor for...
Thanks for the update, we got past the wiring issues, and we hope to be bumping motors soon. :)
Ah! Thank you!
That clears that up. :)
I did notice that the IO list that came from CamSoft has the E-Stop on pin #37, but the manual specifies pin #57. But that can get sorted out in debug.
...
Hi guys,
I'm doing the installation of a CamSoft system on a lathe for a friend. The hardware came with a Adlink PCI-8136 DIO board, not the CS-16600 Motion Board as mentioned in the "Wiring Notes...
So I fixed Thurston's board. Which consisted of removing all of the chips, installing sockets, fixing two blown traces, and putting in new chips. By all appearances it works.
However this...
Hi guys,
So a friend of mine bought a Takamatsu with a Yasnac 2000G and a dead West Controls BTR.
I took the BTR home and took it apart as much as I needed to replace the ICs and socket them....
Yeah, silly me. I thought that when they specc'ed "Phase Current" they meant Phase Current. :rolleyes:
Thanks! I buy from Digi quite often, so I'll be able to roll it into some other...
Holy crap! I just did the math on my 5.6 mH motors, and you're right, a 48VDC PS is called for.
Jeez, why don't I just plug it into the wall socket... :)
But it ended up being the resistors. ...
I just got my new G540 wired up today (the Z axis anyways), and I decided to try it out to get the direction of the stepper right before soldering it up.
Using LinuxCNC, and using the G540...
Maybe. But I would think that my post count would have given it away first. :)
But for point of reference, this is just one of the machines that I work on:
Saturn Corporation AA Press Addition...