You are missing a critical dimension, length. also your print says 0.025 thick material, but the drawing shows it would have to be 0.5
Type: Posts; User: lanemfg
You are missing a critical dimension, length. also your print says 0.025 thick material, but the drawing shows it would have to be 0.5
I would be interested in doing this if you could call me 505-319-7369
Does anyone have a copy of the manual for this mill? I used to have one before my shop burned and took what I had. I really need to know the belt sizes
would it be possible to get a copy of this ?
I have been trying to find a manual for this machine with no luck, could someone help me out and/or point me in the right direction?
your box is full, or you can email me
Rick Lane
Lane Manufacturing
505-319-7369
[email protected]
not pins dude, if you read my post, I was talking about the bucket, not pins.
Actually stainless is a LOT more wear resistant than any steel! I have done research on that and fixed a guys backhoe dipper bucket, reinforcing the edges with steel, stainless, and AR500, (at his...
what is the major overall diameter? and where are you located basically?
Thanks ZZZZ, I will do that.
I picked up a new to me a centurion VI mill through an auction. The monitor had died before I got it. It powered up before I went to move it, but that was all I had checked. Anyway I got it home...
sent pm for you
Rick Lane
Lane Manufacturing
505-319-7369
[email protected]
You are quite welcome! :)
picture is not showing
OK, now that I have the machine in hand, it is a 16" x 54", 9'3"bed serial # NE6703, HD tool room lathe. 10 HP, 220V, 3 phase motor. it was built in 1952, run out on this thing is 0.003 over 24"...
I just got a new to me LeBlond 16" Lathe and I am having an issue finding out information on it, I will be picking it up on Monday and will be able to get more information I hope. But where would I...
https://www.onlinemetals.com/merchant.cfm?pid=4339&step=4&showunits=inches&id=71&top_cat=60
Email sent
Do you still need this done?
We can water-jet these, de-burred including materials minus shipping for $5.35each. the 5 holes can be any size you want, but this is for 3/16" holes. we would require half in advance and half upon...
I would be interested in sending you a quote if you would send me at least a drawing to rick.lane13 at comcast.net
Rick Lane
Lane Manufacturing
505-319-7369