Thank you drdos. I reset the machine with DELETE+RESET keys at power on. It cleared all the data but the date time values did not change at power up. I then took the motherboard out disconnected the...
Type: Posts; User: ashanh
Thank you drdos. I reset the machine with DELETE+RESET keys at power on. It cleared all the data but the date time values did not change at power up. I then took the motherboard out disconnected the...
I have a similar issue on my Fanuc 16TT control. The clock stopped running and is frozen. I can change it but it does not tick. Automatic operation is also not working and gives 1106 cycle time...
Tried that but there is no display. I have checked all the chips on the sram module individually since the last error was ram parity error. All the chips check out ok.
Thanks AlexFanuc. My cpu board does not have an opt card. It has 11 simm slots populated. Before the issue it was giving a ram parity error 910. Delete+Reset key combination resolved that and after...
I have a used Cinicom Citizen L10 (Fanuc 16TT control) machine which was working fine. Now the CPU board (A16B-2200-0901) does not boot. The top four green status lights are all on and the first two...