Search:

The company I work for , Ai Control Systems, has done CNC retrofits professionally and internally for our own use and others. When we did our first CamSoft retrofit. We did it for ourselves on a...

I am not familiar with this machine. However, the company I work for , Ai Control Systems, has done CNC retrofits professionally and internally for our own use and others. When we did our first...

Ai Control Systems

Bed-of-Nails ATE Automated Test Equipment

http://www.aicontrols.com/cache/images/AI/Projects/CircuitBoard/400-img_2879.jpg

EMC2 CNC Control Enclosure Smart Drill Upgrade...

Has anyone ever used EMC to profile center less grinding wheels. The end user would like to make the interface as conversational as possible. They want to make bolts of varying sizes

We are tying to help a customer who is looking for an affordable centerless grinder with a CNC controller. He would like it to be conversational in its programming, basically, to make bolts of...

Is this what your looking for?

75369

This is the site of the manufacturer http://www.easy-cnc.com/<O:p</O:p
<O:p</O:p

This is the unit that was purchased spec sheet...

I am tring to set up EMC2 with this driver. Has anyone else used this board with EMC?

Apparently this thing's controller is actually from Omeron. If you mixed and matched the right hardware you could actually get it to intemperate gCode. It still needs to go.

We are still not...

67876

http://www.logicsupply.com/products/lf_gs_l05

I need to make few waves on this project as possible. So, I went with something we are ordering on another project.

In my experience...

Thank you for your comments. To answer your last question first, we are a control systems integrator and CNC retrofitter. We have done a bout 6 Cam-Soft applications ranging from a 3 axis drilling...

I agree that closed loop is better then open loop. In this case the customer is basing the requirements off of the existing solution. The high costs of repairs on an old microcircuit design have...

I am considering EMC2 for one of our projects. My hope here is to get some general feedback from form users and even possibly build some work relationships.

The question is, how do I leverage...

As Control System Integrator, we have done several Cam Soft integration projects. When we first started to evaluate Cam Soft we did it in house on a drill table we use for drilling back panels. Later...

I have the manual, if anyone ever needs it. We have two drives as well. I hate to sell them cheep, due to that fact that we couldn't find a viable replacement when we needed it. We bought one on eBay...

We have the manuals and two drives that work and one that dosn't.

This was an old post I don't know if you still have interest.* We replaced these units.* We may have a replacement that would work...

This was an old post I don't know if you still have interest. We replaced these units. We may have a replacement that would work with the Boss. However, we never tested it with the Boss. We are...

We recently replaced these units with Advanced Motion Controls 50A20 drives. It worked well for us. However we have a mill that was upgraded o PC control, I don't know what the old computer needs to...

Our company, Ai Control Systems, converted a Bridgeport Series I to PC control. We replaced the servo and spinal drives. We used Cam Soft/Galil for the CNC motion control. We have updated and the...