Hello!
After a series of issues we are finally starting to get our Dah-Lih MCV 1500 back running, but we are facing one last problem (it seems) that we cannot figure out.
The machine has a fanuc...
Type: Posts; User: DanielBamek
Hello!
After a series of issues we are finally starting to get our Dah-Lih MCV 1500 back running, but we are facing one last problem (it seems) that we cannot figure out.
The machine has a fanuc...
Thank you for the tip, buy oh wow that seems like a complicated way of doing it.
So this is what i did:
1) Moved Z-axis and B-axis to their marked Zero point and set the zero for them by...
I figured it out! The reason i was unable to move X and Y was because i had APZ parameter for these set to zero. (z and B was moveable with APZ set to 0 for some reason)
First i set the zero point...
Hi again guys.
So I have replaced the dead batteries.
Upon starting the machines all of the 1815 APC parameters were set to one. I understand now that I have to find the correct zero for each...
Sorry for the double post but i got to thinking: When clocking it up with the DTI, what will be my reference? How do I know that I have the zero, if you understand what i mean?
Hmm. Okay thank you! I will look in to this and see what i can do.
Thank you for your reply.
After fiddling around a little bit yesterday i figured out what went wrong when following the procedures i found on this forum.
What I did was enabling PWE
Set...
Dear forum, I am in need of help regarding an APC alarm due to battery failiure over the summer vacation and I think the machine dealer is trying to rip me off.
We had replaced the backup batteries...
Hi, guys!
I've been googling but i cannot find the answer to my question.
We have a Doosan Puma 2600LSY with a fanuc 0i control.
After the christmas holiday I have an APC alarm flashing in...
Hi guys!
Our CNC-guy is on vacation and i'm in serious need for help here.
We have a dahlih mcv 1500 machine with a fanuc control
I need help to program an arc. I guess there is some g-code...
Hi!
I know there is a lot of these threads here, but i can't seem to find exactly what i'm looking for.
I work at a small mechanical manufacturing company, and we are now investing in a CAD/CAM...
I'm sorry guys, my english got mixed up a bit there, I ment that it's a mill. So i'm going to try what Andre' B suggests.
Thanks! This was really helpfull since i'm really new to all this!
Have...
Hello, boys and girls.
I really need help here.
We have a Dah-Lih lathe with fanuc manual 0-MC software.
How is the best way to program an elliptic toolpath? Is there a function for this, or can...