dear all
i have technical problem in hitachi sieke va-40
the machine do zero return successfuly,
it doesn't work automatically, the spindle doesn't work manually , i checked the push buttons...
Type: Posts; User: azizcom83
dear all
i have technical problem in hitachi sieke va-40
the machine do zero return successfuly,
it doesn't work automatically, the spindle doesn't work manually , i checked the push buttons...
hi,
actually i don't want to post it here.
i will move it to the right place.
best regards
dear all
i have technical problem in hitachi sieke va-40
the machine do zero return successfuly,
it doesn't work automatically, the spindle doesn't work manually , i checked the push buttons...
thanks, i will check when i reach the machine.
hi , i think the system is not booting , and i need the parameters. i can't catch more photos right now, because the government instructions against corona virus. the city is closed. but i have these...
dear all,
hope you are doing well and safe.
i face problem in okuma 20lc. unfortunately, there is no user manual and no maintenance manual.
the error is "SPB verisio e7". it looks the machine is...
hi,
i am looking for the same parameters,did you find it?
hi all,
i have bessie rover 322, i am trying to copy files from floppy disk into internal memory, i can see the files i want to copy, but when i start copy it, it didn't copy, and when i want to...
hi all,
i have bessie rover 322, i am trying to copy files from floppy disk into internal memory, i can see the files i want to copy, but when i start copy it, it didn't copy, and when i want to...
Hi everybody,
i have a milling cnc machine with om-f control system, the machine lost its parametes, i have part of parameters, but the most important parameters are not available like option...
hi,
i am also looking for Fanuc Om-f parameters, especially the optional parameters.
best regards
dear all,
hope you are doing well.
i have a problem in cnc mill machine manufactured by cincinnati company, arrow vmc-1000 model, the fanuc system is 18i-M, the problem is alarm 90, "reference...
hi,
i have a problem in fanuc otc system, it belongs to puma 10s lathe machine.
i had problem when i tried to change some parameters,
i tried to change d3xx group, it didn't change the value,...
hi,
i have problem in s series servo drive, the servo drive type is a06b-6058-h005 , the problem is rdry signal is off.
actually i have checked the 110vac and it is available,
best regards
hi,
i have problem in s series servo drive, the servo drive type is a06b-6058-h005 , the problem is rdry signal is off.
actually i have checked the 110vac and it is available,
best regards
sir,
please do you have any answers?
hi, i have conducted the procedure you have sent, at the beginning, no lights appear on the ready button, there is a 2 7-seg digits, it shows 01 , i checked the emergency switch, there was no 24vdc...
thanks my friend,
have you got the files i have attached in the previous thread?. but i didn't try to press ready button, is it clear button to catch ?
i will try these procedures and inform you...
hi,
i have entered parameters for puma 10s machine, and have this status "not ready". the manufacturer doesn't have a complete list. may be i still need more parameters, who can help me? who is...
hi my friend,
i got these parameters from dossan korea, i i have entered the motor model and apply the auto set process, i also entered the rest of parameters. i got not ready alarm. now, how can i...
HI,
I NOTICED THESE PROCEDURES IN THE ATACHED LINK, IS IT POSSIBLE TO RETURN THE PARAMETERS?
http://www.cnczone.com/forums/fanuc/178920-cnc.html
MANY THANKS
THANKS MY FRIEND,
TODAY I HAVE ENTERED THE SERVO DRIVES PARAMETES AS IT IS DESCRIBED IN THE INSTRUCTION SHEET YOU HAVE SENT, EVERYTHING WAS OKAY, I HAVE NO ERROR REGARDING THE X AND Z DIVES, BUT...
many many thanks my friend, unfortunatly there is no profescient technicians, i want to work alone to solve it, all what i need is clear instuctions to follow. if you have a complete manual, please...
hi, i still have the same problem.
dear friend,
i am engineer, and will be careful, i know how to enter the parameters, will makesure that all the speeds rate are to the minimum and make sure the emergency button is always ready, i...
many thanks my friend. do you think it needs to be entered only, or i need to modify some parameters ?
it is not available, the controller is o-tc, the serial number is ps100701
best regards
hi,
i have problem in puma 10s cnc lathe machine.
it has no parameters, please help me to get its parameters,
is it possible to restore it from the eproms??
if somebody have them, i will pay...
hi
i need puma 10s parameters,
please help me
best regards
hi,
i am a technical engineer, we bought cnc machine, daewoo puma 10s, unfortunatly, its memory card is damaged, i bought a card, and need the machine parameters.
please help me.
best regards