Hi,
When I execute the program to run the machine, when G01 activated, no movement was make during spindle rotates. But when when I stop the spindle, the table move in G01 mode.
That anybody...
Type: Posts; User: mzar
Hi,
When I execute the program to run the machine, when G01 activated, no movement was make during spindle rotates. But when when I stop the spindle, the table move in G01 mode.
That anybody...
Normally its happened caused of positioning of spindle (sensor activated) in out of travel.
You can activate G70 and G71 to switch between unit in inches or milimeters
You can activate G70 and G71 to switch between unit in inches or milimeters
You should be included the first point of your profile in the program and s__ value should be the point block number.
From my experiences, programming is easiest if we set the actual tool radius on the tool offset table. Any wear or offset of the tool will be included at the wear coulomb. U can modified it easily....
If u create the program from the CAM software, please to check if any incompatible code that included in the program
For soft limit overrun, u can have moret han one solutions.
u try this first. Setting the zero offset first before any simulation. Please make sure the size of workpiece still in the machine...
When u simulate it, the problem still occur?
.PIM is just the for mat of file.
U just rename your CNC program file with number and the extension is .PIM
eg. 13456.pim
Hi there,
U can check your cutter compensation is active or not by looking the active G function (G41 or G42) in the Jog Mode. If the codes is active that mean the cutter compensation is active....