Search:

hi
i am machining a part on a 5 axis, using rotary programming, first of all, i check the OD to see it is true by rotating the table

I probe the O/D to check the run-out of the part with 8...

i have just gone on to Edgecam 2021, first update in this version. i have updated the post processor load of times but when i open the code wizard document and try to compile it, the compile button...

447482

sorry, the alarm message is actually 'standstill monitoring err. in x

we have a DMC200U with a I530 Heidenhein control, which kept coming up speed sensor fault, the machine would run ok with linear moves and soon as the spindle came on the brake on the machine would...

finally sussed it out, in settings in the launcher, the master strategy location was pointing in the wrong folder should be USER\themes\default\strategy now working perfectly, thanks for advice

after I click ok on selecting roughing option the dialog goes off then nothing happens, cheers for reply I will get latest update installed ASAP and let you how I get on

Regards

we have got EdgeCam 2017 R1 at work, I tried to use Machine feature in machining but all that comes up is a dialog asking do you want to Rough, Finish or Both the feature, I aleady had a tool picked...

we have a five axis DMG machining centre, using an Heidenhain control every time I use the post processor with the A axis the code which is outputted I can guarantee the c axis will be 90 degrees...

yes we use G54-G59, I have just started at the company but this is the first time I have seen this, we have another machine same as this one but that reads like I am use to. when you are say 50mm...

Our Machining centre is a mori-seiki mv45 with 0-m control, when we set our machines up, say we are at 50mm above the job datum Z50.0, the displays reads from the home position and will be something...

at work we have alot of Edgecam files which are drawings of fixtures, is it possible to convert these drawings to Solidedge?

in heidenhain programming labels are like sub-routines

does anybody know if you can write labels in Edgecam if so where do you write them and call them up?

arrow 750, acromatic2100 control and about 15 years old, thought might be a common thing? guess not

does anybody know why the spindle load meter goes up and down, like from 0 to 100% when i only put a spindle speed in without it cutting. when i do cut metal i cannot tell what load is on the spindle.

this happens not just on one particular job but every tapping job, only happened since a new hard drive was fitted, i was not at the company when it got fitted. i think it is a parameter but where?...

about 12 months ago we had an hard drive replaced on our Arrow750 with Acromatic 2100, since then, when we tap, from the tool change to the job and when finished tapping back to the tool change the...

our error just got worst this morning starting machining within 10 mins m/c tripped out but will not power up at all now, do not know yet if they are both related thanks for reply though, get back...

i have a cincinatti arrow 1000 with acromatic 2100 control, when machining the spindle will stop and come up with an 'index error' the error tells you to go in to programware and have a look for...

i have got 2 fanuc O-T contols on one i can programme A for angles and C for chamfers but the other control does not reconise these commands, is there a parameter which is not turned on?:wave:

i have a heidenhain 355, i am in search of a probing routine for I/D & O/D probing. i would like to run this routine in cycle rather than how i have been doing it manually, can anybody help me with...