Hi Chris,
In my case it was some fluke with the fueling inverter. I have reset and reprogrammed all the settings and the problem disappeared. I was glad that it was just a simple reset necessary....
Type: Posts; User: standeman
Hi Chris,
In my case it was some fluke with the fueling inverter. I have reset and reprogrammed all the settings and the problem disappeared. I was glad that it was just a simple reset necessary....
does anyone can help me with my Z sensor - Where the wire is attached (I do not want to track it manually) Or maybe anyone has a wiring diagram for this machine? I appreciate your help
My limit...
I have got FimCNC FM1325. What seems to be the problem?
This was strange because no one activated E-Stop. I've checked them and all three switches connected in parallel are open. I do not know too much about fuling inverter. I suspect this servo alarm...
"ALARM - User has pressed emergency key - system locking" this I got when I start my machine. Fuling Inverter DZB312B dislays E001 or U332.5. Reset button on fuling inverter won't fix it.
If you...
Hi Jim
I fixed it. Most likely the belt slipped one tooth.
Hi Jim,
thank you again. I have sent this video to the manufacturer; FirmCnc. I wonder if unbolting one section of the rack and moving gantry over where the gear is disengaged would do the...
Hi Guys,
I have a problem with the machine (wood router model FM1325).
I believe it jumped or skipped the tooth. When I try to move it in "Y" direction it jerks. One side is having difficulty...
Hi Guys,
I have a problem with the machine (wood router model FM1325).
I believe it jumped or skipped the tooth. When I try to move it in "Y" direction it jerks. One side is having...