What kind of rating are these fuses ? My system is after many years getting assembled and I would imagine 20 amps is 20 amps ac or dc but for a 48volt power supply calling for 20 amp fuse what fuse...
Type: Posts; User: something2do
What kind of rating are these fuses ? My system is after many years getting assembled and I would imagine 20 amps is 20 amps ac or dc but for a 48volt power supply calling for 20 amp fuse what fuse...
Thank You ! Will 3d print some for my box.
Part of the problem is they are too close together but I am working with what I have. The aluminum plate is straight according to my straight edge.
How straight is T slot....If I would just put v...
They are 1 inch rods.
Yes the gantry.
393958393960393960
- - - Updated - - -
They are 1 inch rods.
Yes the gantry.
393958393960393960
Hello guys, I have a 25x36 half home built half old dyna cnc machine. I was just cutting some cabinet sides for one drawer bases. The short x axis is deflecting(maybe) about 1.5mm in the middle of...
I have just bought one to fool around with. My machine will need upgrades to make it more rigid but it will work good enough to learn on before moving to a bigger machine . I think the biggest hurdle...
I am looking into cut2d pro cause it does jobs bigger than 24x24 . The price is more but if it makes my life easier ! Is there a way to measure out a set up grid to mark out the hole positions like...
Meshcam didn't seem to pick up the circles and i was just fooling around with fusion. It will take time to learn it but i think in the long run its the way to go.
Sketchup with milling built in or...
Hey guys i have a small 24x36inch router that I am trying to build cabinet sides on. I can get the shape cut but the holes are elusive . I am learning to draw them out in sketchup but have failed to...
I know this is an old post but I can't get sketchup to upload into meshcam to same size in dxf or complete in stl.
I was hopeing there was a higher voltage driver like these in the 3 amp range.
Is there any like the THB6064AH kit in a higher voltage?
Hey guys,I would like to upgrade the drivers in my small cnc. It runs 1 KL23H286-20-8B on the z 1 on the x and 2 on the y. They are 2.8 amp ,1.8* 200 step and i think 4.2volt steppers. currently i am...
I just changed my drivers to full step and moved my speed up 50%. Now miine is doing the same almost like when it should loose a step it trips the limits .Running steppers? I change the speed back it...
nice work guys
Thank you for the info guys.
You should take their EXCELLENT customer policies and exchange spindles it says it is an option for that mill.
Could someone please explain the difference between the two (r8 mt3)?
thanx
Can I ask what kind of heavily discounted price was agreed upon? There is a floor model that was a return at a local PA. Maybe I could pick this one up cheap.
What is your opinion of the machine ?
I,m using an Intel centrino core2 duo 7200, Inspiron 6400 ,15 inch lcd. Its hooked up to a kill a watt meter and the battery is charging.
It reads 1 amp , 68 watts and .95KWH. There is no dvd...
"Due the censoring(removal) of my previous post regarding my DynaCNC experience I will no longer waste my time with trying to share experiences."
I read the post before D-Day and don't think is...
askman could you please post pics of your upgrade/fix. I'm sure I'll need to do the same to my machine to satisfy my expectations . I'll post my story once it has an ending.
-I think these drivers are only good up to 32 volts so building a new box is a project for next winter .
-yes 10tpi acme
-and yes I do have the y's at 1:1 which i could gear up but z and x are...
Finally had first movement.
-no smoke
-no broke machine parts
-wood part that almost looks right
The fastest i can get out of it is 20ipm without loosing steps, unless its some settings i screwed...
I'm still getting the correct parts sent out and completing my driver wiring on the kit that i got from keling tech. I'll post pros and cons along with some pics when i get time. I'm also quite sure...
found this on ebay 7629740166
He has bad english like me and an ad i can't understand he told me cost would
be 4700 us delivered to vancouver canada he is in china. Im sure it is the same
maker....