Search:

Is there a easy way with common tools,to figure out how much torque it takes to rotate a shaft,so I can figure how what kind of torque I would need in a motor? I want to turn the shaft on a table saw...

I just thought a stepper might work,I don't need a stepper just want some motor small in size to turn forward and back with torque,and though maybe a stepper was the answer.I wank to rotate a crank...

ok so that thought may not work,what I need is a small motor,about the size of a stepper but doesn't have to be one,that can turn forward and reverse,with a strong torque,Ac or dc.any ideas?

I have a design I'm working out in my head, and it involves a stepper motor,so I have a stepper motor question.can the motor be run with just a on/off forward/back manal switch,or does it need the...

I'm thinking about build a cnc and have available some Series 30-3060,Would this be strong enough for a 2x3' wood cutting cnc router? what size for a gantry?

I'm ready to pull the trigger on a wood carving cnc; I'm looking hard at the large X-carve, 31 x 31" usable area.and that seems like a size i could live with.What other alternatives do I have at or...

I'm ready to pull the trigger on a wood carving cnc; I'm looking hard at the large X-carve, 31 x 31" usable area.and that seems like a size i could live with.What other alternatives do I have at or...

How about building an enclosed box around the whole unit and keep a 40 watt bulb,to keep the temp up.that way you don't have to keep heating a garage.

I just got the plans this week for the 25x25 and was thinking of maybe making the frame in 30/30 aluminum;the 80/20 stuff.do you think I can get away with that size for the frame or should I try to...

I like the angle iron Idea.I'm building the Solsylva 25x25;question do you think I could build the X and Y out of 3 x 3 x 48 Aluminum T-slot material size 3030 to replace the 2x4's and T-Slot 1.5 x...

from the video,looks like your router or Z axis is bouncing all over the place which could be the cause.

I look at the monitor and think 82' nd think of those orange or greenish white lettering.not that it has anything to do with the machine just a flashback.

you could always design a machine,then take it to a machine shop have them build it to your specs then finish it at the stage you want to tackle it at.I.e shop builds the frame and gantry,then you...

does anyone have a good easy way to drill three hole on the same line?I need to drill 3 holes on a pipe they all have to be the same axis/line;but when I have try this before and it ends up in a...

where can I find at a reasonable price online the following,
3/8 inch diameter 10 thread per inch, 2 start, 5 turn per inch lead screw.36" long?

what sizes are the 80/20 and the alumuinm plate?share any measurements?parts list?

why not some rubber donuts between the mount and what its mounted to,to absorb the vibrations.

CNC turkey craving,might be onto something!

Wish I could get to your site, but when I click your link it flips me to my router set-up.and I don't know how to change that.
That being said. would 8020 T-Slot Ultra Lite Smooth Aluminum Extrusion...

I'm wanting to build a cnc router,for engraving in foam, shape cutting,and maybe 1/4" ply and thin plastic,I have found some 10 Series 1" x 3" T-Slot;Is this too small for a cnc or should I go with...

I don't no if this is a browser problem,or a link problem;but when ever I click the link 301 Moved Permanently.I go to my router settings.Is this a valid link?is there a work around?or is this...

I have a old plotter printer about 2-3' wide I was wondering what you all thought about using the parts I can for a cnc router I'd like one for carving foam halloween props.think there are usable...