Search:

Mitsubishi MTC10B lathe M325LGV Meldas control.

I have the MR-S11-100-Z37 servo drive on the x axis with abs and mp-axis a/d converter. Also the MR-S11-200-Z37 servo drive on the z axis with abs...

Thanks, I have the manual so Ill go by that. What about the z axis? Why am I not seeing it.

Im going to work on it now. Ill check the wiring to the servo and such, maybe Im just missing...

Hello and thank you in advance.

I just got this used MTC10B lathe w/ 325LGV control. I was able to get a screen and all green lights on the control. However I can see that the parameters need...

Once upon a time I had a sabre 500 850sx. Rick remembers those days. Several buttons on the keyboard were not working. I took it apart and cleaned the electrical board and some started working,...

Hello,

I just bought a 1992 Maxim 500. Its a B machine, Im just curious of what I have to look forward to.

Does anyone know what the difference between the a and b model is?

Also, it...

Heres the update for reference and others whom may trouble shoot this on their own in the future.

I found a burn mark on the SF-CA card (spindle drive top card) on the pin connection for 5v dc...

Hi Rick, good to run into you on here! I hope your sabres are running good these days. I sold both of my Sabres and now have an OKK PCV-50. Its a great machine with box ways and a little more...

I have been getting a "spindle troubled" alarm on the nc. I also have found that the spindle drive will not power up. Next I determined that if I unplug con101 from the back of the fr-sf main drive...

Thanks for you input Chippy. It turned out to be the MC721 board. Syed at Mitsubishi was very helpfull and knowledgable. Also, Kevin in Minnesota was great.

One thing to add is that the...

Ive had several of these machines over the years. Overall a good machine and the 850 is a good control.

When you turn the machine on you must first use the rapid keys to align manually to the...

Meldas 320m control is having trouble on the OKK PCV-50 vertical machine. While running production last week I hit cycle start and nothing happend. Control locked up and remains in that state. ...

Seemed like a good reliable machine until the spindle drive failed. $5,000 later its working again. Then I found out that thats not the first time it happened with the machine. Weve had the...