We have an EMK 3612. Little bit different but
Parameter 1815
A00110010
Type: Posts; User: Jimmy49548
We have an EMK 3612. Little bit different but
Parameter 1815
A00110010
I do not see any pictures
How do you get it to stop?
The person who screws things up, gets to fix it. Lol That has always been the control. 99.9% of the time, I am double and triple checking my own work because I've been there and it is not fun. I am...
1) Once you press the reset button, the error will clear but the press no longer knows what tool to use or where in the quadrant it is. Yes you can use the RAM position switch to check if a punch is...
Your y axis guide rails may be worn out of spec
1. I do not understand your first question.
2. What is the purpose of the external software.
3. There are many variables regarding tooling maintenance. Unlike the standard punch press, the tools in...
When a program has a reposition, I set the program to do the reposition first with a G25 which will retract the clamps 1.27mm. When it repos back I use a G27. G27 does not have the retract.
The M00...
If you have table extensions for material support when using the reposition, it's not a big deal. I try to avoid it unless the parts are longer than the table size due to handling of the scrap. It...
Typically, we don't use the reposition unless the parts are longer than table size. 50mm border does seem to be a waste of material, unless it is the clamp edge. The other 3 borders can be 25mm or...
What is the table size?
Yes, some of the older punches and punch holders may require shims to achieve proper length and setback. Setback is the distance between the end of the punch and the stripper plate. The newer tools...
Shimming the die after grinding is absolutely necessary. You do not want dies that are next to each other at a different height. This will cause the material being punched to dent and warp.
After...
It's an older machine. Only the newer machines have that feature
It is very simple to skip lines in the program. Example...
G92X120.079Y60.039
G06A0.09B2
GOTO1
M501
X77.25Y45.0T115C90.0(RCT 4.000 X 0.250)
X77.25Y42.367
X77.25Y38.094
X77.25Y35.461...
You can draw a diagonal on them and line up their midpoints
Those 2 issues are exactly what I was thinking. If all the other stations engage when and where they should, I would guess a parameter has been changed. What controller is being used?
All the other stations work well?
I have had similar issues with Amada turret press. I have found that when turning off the machine at the end of the shift, rotate the turret so a non Auto Index station is under the striker. I don't...
I wouldn't worry too much about the tool overlap. If it's an issue for your machine, you will notice excessive and/or premature wear on the tooling. There should be a setting in the software to...
Generally, the tool overlap should be less than half of the tool length. There may be a setting in your software that warns you when the punching operation is less than half the tool length.
If it was older than 1999, you might've needed to upgrade the controller. That's all. I have not noticed the servos being overloaded.
I have not tried the shear wheel tool but I have tried the rolling offset and the rolling rib tool. Straight lines are easy to program and the tools work very well. Radius paths are little more...
I would keep the form tools away from the cut tools. I would also keep the form tools away from each other as well.
Keep your form tools away from punching tools. Sometimes there is a height difference in the dies. Also check the actual punch length. It should be 207.5-208.0 mm. It could also be the spring on the...
Make sure all doors and covers with a switch on them are closing properly. It could be something simple.
Try Amada spelled backwards "ADAMA"
Does anyone know how to adjust the servo backlash? We are having issues holding tolerances in the X direction.
Just a guess, but after a quick google search, the cmos battery is part of the pc.