I am having a problem with an error that is coming up on my CNC Plasma machine controller which is a Hypertherm Microedge.
The error message is "Fast Stop Active"
Could anyone guide me as to what...
Type: Posts; User: mayordrycreek
I am having a problem with an error that is coming up on my CNC Plasma machine controller which is a Hypertherm Microedge.
The error message is "Fast Stop Active"
Could anyone guide me as to what...
Currently with our Microedge Pro we load our G-Code onto a USB and then we have to walk out into the factory and down load to The Microedge. We would like to put in a cable from our drawing office PC...
We have a CNC Plasma cutting machine and would like to cut some art work from sheet steel.
When I load a DXF file my CAM software converts to G code ok (The software I am using is FastCam...
We purchased a CNC Plasma/Oxy 3500mmx1800mm from China we specked Hypertherm software and servo motors.
Had the machine 4 years now and it runs great.
We did visit a number of manufacturers before...
Using Fastcam for Plasma profile cutting I cannot find where to programme Chain cutting so that I can minimize piercing.
Can someone help with this?
Regards
Using a CNC profiling machine Powermax 1650
Hypertherm PHC Height controller
I am getting a lot of slag inside of the retaining cap of my Duramax torch.
Getting error code 02
Using 105 amp...
Would like to make a push type feeder for angles flats pipes etc can anyone help me with this I am a sheet metal worker so the electronic side of this i will get lost on so what I need is maybe a...
I use Fastcam pro also with the Hypertherm Microedge Controller.
The Fastcam Manual is next to hopeless for a beginner so they try to sell you training at an over the top price.
Have you been shown...
I use fastcam to generate a NC file but when I transfer it to the Hypertherm Microedge controller it flips or mirrows the part in the Y direction, which makes the kerf on the wrong side. Can anyone...
Thank for setting me straight, you say to put in a topic but, properties box says title I thought this was for my name so I experimented by putting my name in.
It would help if the properties box...
I have a CNC Plasma machine when I nest parts with fastcam sometimes I can move the parts with the arrows on the keyboard, sometimes the will not move.
Anyone have an answer to this?
I have Fastcam software when I load a part on to Fastnest the outer shape is green the inner shape is white and when I do the cnc output the holes are not there.
Anyone know how to fix this problem?
I have a CNC Plasma Machine which I use Fastcam to generate the NC Code.
When I view the finished cut path with torch direction it looks good but when I load it on to the Hypertherm controller and...
I tried the tek dept but they blamed Fastcam setups and fastcam blame Hypertherm.
I am at a loss!!
I also use fastcam and I adjust the kerf width on the cnc controller
Does anyone know of software that can develope flat pattern shapes for sheetmetal boxes with allowances for mitres, notches etc.
I have a CNC Plasma Machine which I use Fastcam to generate the NC Code.
When I view the finished cut path with torch direction it looks good but when I load it on to the Hypertherm controller and...