Try this:
I no longer do task engrave, cut - it's too confusing to know which one it keeps in it's 'memory'. What I've tried lately is this - make sure your color settings are RBG. When you're...
Type: Posts; User: BrianJenkins
Try this:
I no longer do task engrave, cut - it's too confusing to know which one it keeps in it's 'memory'. What I've tried lately is this - make sure your color settings are RBG. When you're...
Dust Collector systems move a lot of CFM because of their setup and how large the impeller is.
More CFM is more noise though. Try and mount the fan closest to the exit point and keep your bends...
The cost difference between the larger sizes was only about $10...but a 6" fan was around 500 CFM. If your duct run is short you can get away with something smaller. If its going to be long I'd skip...
Are you able to duct it outside? That's your best bet, unless you want to deal with the charcoal filters. Here's writeup for one: DIY air filtration unit for <$200 - Blogs - Sawmill Creek...
No problem! I've ordered from them before, it's a good company to deal with
D/K40 upgrade parts
Make sure you launch CorelLaser in admin mode, and it will launch CorelDraw.
You don't really need the object manager (it helps a lot), just select the object with your mouse, and then hit the...
You have to send both though so it places the engraving in the correct spot. In order not to engrave the cut, change it's color to white (RGB) and the laser wont 'see' it.
It's a pita but it...
check and see if it has voltage
Short version - from what I read at least, do your own research too - apparently they really aren't needed for colorless lasers. The colored beams apparently do more damage. The reflection you may...
How do you like the Ruida controller so far? It does have a virtual printer driver too
It's a virtual print driver to communicate to the laser. I should process the job just as you see it. (I don't have one so I cannot confirm)
I told Yumiko this, but you guys need a US importer/warehouse. I really like your machines, but the shipping cost, and unknown duty costs were too much for me.
FYI - When combining tasks, if you include your 'other' task as either White (RBG) or (No Color) it will use it as a reference and ignore it.
Basically, say I am rastering first, but it's in the...
What DSP does it have? If you don't know, take a picture...
Controller
http://en.rd-acs.com/pro.aspx?TypeId=33
Printer Software
http://en.rd-acs.com/Private/Files/RDVPriterSetup.rar
I'm speculating here, but I've been looking at the Ruida Tech controllers and they offer a larger touch screen model.
They offer a print driver and I believe 256 gray scale support too.
Anyone...
I had that problem when I would first run the job you saw in the video. Again I think it has something to do with the way laserDRW takes the data and sends it to the engraver. Mine by default only...
Try this - I was having trouble trying to get it to align between doing a raster and a vector. I think it has to do with how the data is sent from Corel to the encoding process.
...
Marco did mention he is going to introduce a newer touch screen DSP in the next few months. Not sure any details though
I'll take a look at the screen recorder. I knew the print screen, the camera was having some issues focusing on the screen. I'm a woodworker, not a video guy :)
Thanks - I bought it because it was cheap, and figured I'd learn with it. It's been a LOT of trial and error - I think I cut that around 20+ times before I finally got it right. But overall I'm...
Try this...
https://www.youtube.com/watch?v=MR7967VHKnI
Is the Sinjoe AWC708 the controller of choice? What about RDCam controllers?
The Sinjoe controller doesn't support Corel X7, but I emailed them to find out if it'll be updated. They seem to be...
I have a video for the CorelLaser plugin, but it only applies to CorelLaser/LaserDRW
https://www.youtube.com/watch?v=MR7967VHKnI
I bought one of the Shenhui K40 machines and was looking for a locally available product that may work for the honeycomb bed.
Any thoughts on using diamond wire mesh?
Looks something like...
You were right it was a foreign website, and shipping took it up quick. There is another one on Ebay though, that is CA based - however researching the quality of the components with the CNCRP kit I...
Even Gekco's Motor has 4.82mH
http://www.geckodrive.com/g734-950-4.html
I've been looking hard at cncrouterparts.com as far as the pro level kits and they really seem well put together. I was in for a bit of a surprise with the electronics kits though!
Their kits use...
From ebay: Power Supply:220V/50Hz
Is that the operating voltage of you country? If it is, I'd verify with the seller that you didn't get one set for 120v