Search:

Not to worry, I sorted it by changing the sub pgm to have an Internal m98 call with a Q...

Sorry,
no should have said its the "fanuc 31i model A"

I've been meaning to sort this for a while but I can't find the macro no. Anywhere For the repeat display on the screen as I'd like to incorporate it into a few of my macro pgms as with the sub I...

I've long since left that company now but still working on doosan machines currently a hm1250 so it's still good to know the answer to the question, and we are pretty much always thread milling stuff...

hi there sorry i was putting up a few posts at the same time so i missed out the machine spec at the time of posting on the post.

machine: 2013 doosan hp5100.
panel: fanuc 31i model ...

Thanks for your reply, we finally sorted the issue.

We had to fully power the machine down and unplug it from the mains for about 30 seconds, after power up the measure option worked again, with...

See the attached image....

Sorry forgot to say, im not in manual guide i or ezi guide i as i dont use it only when i need to, also i did try it with a decimal pointand got the same result "write protect" its a 32i i believe as...

Hi all,

as im a cnc miller varying from 3 axis upto 6 axis ive never really been allowed to be let loose on a cnc lathe till now, last time i was on a cnc lathe was about 25 years ago for 2 weeks...

Just wanting to know if it's possible to adjust the minimum rpm you can rigid tap on as someone at work managed to mess on with the parameters and get the machine to run all the way down to 2 rpm.
...

Hi,

starting to find more and more issues around this 31i panel that i have never encountered on older fanuc panels when writting custom macro cycles.

So in short i have created a custom macro...

Problem now fixed there was an extra parameter that need altered.

#11302 needed bit 2 (FPF) turning off as this was stopping me from going any higher up the directory as i was locking into "PATH1"...

As per other post this is now resolved..........

"Problem now fixed there was an extra parameter that need altered.

#11302 needed bit 2 (FPF) needed turning off, as this was stopping me from...

The panel is series 31i - model A its on a 2013 doosan hp5000.

I'm looking at seeing if there are some other settings gs that might require adjustment as I also can't see any of the 9000 pgms...

Yes the machine definitely has the renishaw programs in the memory as I've just been into mdi and hand typed In...

G65 p9810 upto p9823

And all the renishaw cycles are in the memory also the...

have you tried m184 as this allows the movement of the axis without the spindle turning m185 reverts back to spindle rotation required when axis is feeding ....

this does not apply to rapids...

Hi stuck again with this doosan ....

ive googled how to make 9000 pgms visable on a 31i fanuc panel.

ive turned the PWE to 1

then turned the 3202 parameter ne9 from 1 to 0

but this does...

Hi just looking to see if someone could shed some light on how to go about using the m103/m104 spindle load command?

As the programming manual for the machine we have is missing before i started...

HI all,

just thought id give this a go this is the 3rd company ive worked for now that have a doosan hp5100 which have the NC4 renishaw laser height setter built into it as standard, yet not none...

Post now fixed......

turns out the peck depth has to be entered as a "+" value not a "-" value as on the earlier heidenhain post i edited it from, so all it took was to have the [ZP] on the plunge...

as above...

heidenhain 530i "cycle def 200 drilling" issue.

ive been messing around with editing up the odd alphacam post processors over the years but i've hit a wall with this one :(

i...

we tried to get it to communicate with some G&L'S a few month back but with no joy, but we didn't have the settings from giddings and lewis until we had an old desktop pc that connected almost...

Hi,

yeah I was thinking its the only time ive had an issue and also the only time ive tried using a usb to serial port adaptor, I just bought a full set-up second hand pc of schpock for £20!!...

Hi looking for a bit of advice.

as per the title "fanuc 0-t struggling to INPUT a pgm into the machine from a P.C. but can OUTPUT fine?"

I'm now in charge of trying to help set up a machine...

HI there newbie here ive got what might be a simple answer to any seasoned mazak software knowledgeable person?

Ive recently been introduced to the world of mazak machines after 20 years of...