I attempted to connect a 2.7K 1/4w resistor like this picture but it still shows active in I/O screen with no change. I'll order the 1.2K resistor and see if that works. Just to make sure is this the...
Type: Posts; User: Gunmachinist
I attempted to connect a 2.7K 1/4w resistor like this picture but it still shows active in I/O screen with no change. I'll order the 1.2K resistor and see if that works. Just to make sure is this the...
I was able to look it up from where I purchased it:
Inductive proximity switch PNP normally open (between black and blue wires)
DC input range (brown wire +, blue wire -, 6 - 36 V
Maximum...
True, but that was the only wiring I could find in relation to wiring into kannalog
3-30vdc is the voltage I don't have the rest of that information. The diagram on the part is all I got (see...
in the pictures.
In the wirimg pic. I put the brown to power supply (+) and the black and blue wire to JP15 #2 black to + blue to -.
The dynomotion page under diagrams, here is the diagram I...
Ok, thank you for explaining it. I won't worry about that for now.
Another question is how can I wire a 3 wire pnp proximity switch to JP15? I have my current 2 wire limit switch wired there, but...
I watched this video under KMotionCNC Fiducial Alignment, and am attempting to align my sytem as it shows in the video. There is not much of an explanation of where the servo shaft he is looking at...
Is there a better video of this process?
Do I have to have a camera on my servo to align it and what do I do with all the other settings which are different from the instructions and video?
Got it now, but the window doesn't show a the grey shaft so I can align it.
I watched the youtube video and did what it explained which doesn't explain how to do any of that. So, where do I find thoes files?
(C:\KMotion435f\PC VCS Examples\MeasureFiducials) double click...
I cant get my computer to launch the Fiducial Alignment app. I have installed a user button (C:\KMotion435f\PC VCS Examples\MeasureFiducials\LaunchMeasureFiducials.bat) into KMotion CNC and put the...
My init program.
:#include "KMotionDef.h"
// Note Low Gains, Limited Max Limits, No Limit Options, No Soft Limits,
// Large allowed Following Error, No Feed Forward, No Filters, etc
void...
I posted the wrong screenshot, here's the one. 3 axis.
That was it, I had 2 which were 0, I changed those to 1 an now I get Invalid buffer times.
%
O0015
(T1 D=0.5 CR=0. - ZMIN=-0.556 - FLAT END MILL)
(T2 D=0.25 CR=0.125 - ZMIN=-0.1119 - BALL END MILL)
(T3 D=0.25 CR=0. - ZMIN=-0.5886 - FLAT END MILL)
(T4 D=0.375 CR=0. TAPER=118DEG -...
I am having trouble getting g code to work. When I attempt to run a program the g code will stop. I know the code is the good so what else could be the problem.
Replaced the power supply with one you suggested and now i have a working machine.
Ok, Its probably the power supply I have which is a Mean Well din rail power supply. I'll try one of these you suggest.
I don't know any information on the servo motors, there is no markings, they have been warn off. The drives im running are AMC 25A20. I have been running them with a 110vdc 10a power supply, (2)...
No, I junked it. Hind sight 20/20.
I need help deciding how to power my servos. I have a Bridgeport V2E3 which I am rebuilding the control and wiring. The servos came with the machine and are 100vdc 11a, the best I can tell. I believe...
I just attempted to add the file at the end of my Init. program instead of linking it, it's becoming too much of a headache, but when I copy the file and add it to the end, I get identifier expected...
I'm not sure what you mean, #include "KMotionDef.h", and #include "MySpindleDefs.h" at the top of the program are files that the Init. program calls? #include...
I am having a hard time getting code for my MPG to compile. I keep getting a MPGServiceSmoothHardwareEncFilteredRev3 undeclared error on the last line of this code, and Google won't answer me. If I...
I have been tasked with getting a GX300 up and running. It has a Fanuc 0i-MD control and I have been "figuring it out" over the last couple months. I deleted some of the macros to make room for...
That is how I want the system to home which is how my machine at work is homed and what I did, but when I press the button it moves very little (.05+/-). In my code where it tells the machine to move...
I am a little confused about setting my home positions. I am using SimpleHome3axis.c in the c code folder. I have copied my axis information into the program like it states to do, and changed the...
I did my changes to MPGServiceSmoothHardwareEncFilteredRev3 and I am getting an error (; expected) when there is already a ; WTF
#include "KMotionDef.h"
// Example Function as "smooth" MPG motion...
Ok, I understood looping just didn't understand what was meant by, to call a function, but I got it now thanks.
How do I "call to ServiceMPG() from a loop"?