Search:

Hi im building a cnc plasma cutter this is my 3rd cnc machine i've built. its 5 ft by 9 ft im finished with the machine and im to the point to where im ready to mount somthing to it. I found a...

Hi im building a cnc plasma cutter this is my 3rd cnc machine i've built. its 5 ft by 9 ft im finished with the machine and im to the point to where im ready to mount somthing to it. I found a...

I bought a tb6560 3rd generation 4 axis board, while setting it up the cd that came with it would not load the wiring diagram so i wired it up like a normal tb6560 board and the motors wouldnt move...

Im planning on building a 5 ft by 9 ft cnc router, i would like to use 20mm hardened steel for the x y and z but the prices for that much hardened steel is thru the roof. so i managed to find a local...

i have a 3 axis tb6560 board and 4 nema 23 stepper motors with a 24 volt power supply, I know its not practical, but im hoping it will work. i need 2 stepper motors to run the x axis, how would i go...

I have built a 4x8 ft cnc router with 4 nema 23 stepper motors, im going to slave two of the motors together for the x axis. the board is a tb6560, with a 15 amp 24 volt power supply. the router is...