Wanted to give an update.
The sellers got back with me on the Contactor, and told me to just take it apart and clean it, then it should work.
I took it apart, cleaned it, and it did not work.
...
Type: Posts; User: Jmartin2501
Wanted to give an update.
The sellers got back with me on the Contactor, and told me to just take it apart and clean it, then it should work.
I took it apart, cleaned it, and it did not work.
...
Out of curiosity, if the contactor is bad, and I have to replace it. Does it have to match the same brand?
Schneider is the one that is in my cnc cabinet, if I order it off amazon, its like 100...
This is what they sent me.
From me doing an ohms test that I was able to figure out they wired it wrong.
But having this diagram makes more sense.
The only thing that looks different is the...
I wish I did. This would all make more sense if it did. When I asked the company for one, they did not give me a reply on it. Instead they offered to help me with it. It has been in emails back and...
I did a little changing of connections. I did at one point get all the switches on. I got a chatter from 2, then it stopped. I quickly checked to see if it was getting the correct volts and it was...
Alright, I removed the connections from the Vacuum1/2 and Dust. It still made the sound on Contactor 2.
And when you say the motor cables, you are referring to the Vacuum1/2 and dust that I wired in at the bottom?
No, that is making more sense now, thanks.
What I did come across now, is if I don't turn on the breaker for the Main power, and just turn on the breaker for the 220V/1P breaker. I can flip on all...
So, I did a bit of checking, and I am thinking they wired something wrong. I am waiting on the companies reply, but from what I can tell, Contactor 2,3,4 should all draw power from 220V/1P...
Both the left and the one to the right are two 30amp 2pole breakers. Both are getting 220Volts when I check the posts (where the wires are connected) on the bottom of the cabinet, so I know they are...
I talked with the people I purchased the CNC machine from and we sort of had it right on how to wire it. In the end, with my 30 AMP service, I have two 30 amp breakers in the box on the wall. They...
If I base this off of the assumption that L1 Brown is hot, and L2 Blue is also hot then I would do nothing with the red and black wires on far right and just put a ground bolt in that hole to the...
Awesome, thank you for all the help, this has been weighing on my mind for days now much to my annoyance of trying to figure it out on my own. When I wire it up, I will come back with the results...
Thank you so much for the reply.
I guess I forgot to include the Lathe attachment.
I for some reason thought each item got it's own 240V breaker, I didn't know the one 240 could run both...
Thank you in advance with all who can help me with my questions.
I purchased my CNC from StyleCNC some months back, and now that I have it, I of course have many of questions. The main thing right...