If you select the right cross section of cable, it makes no difference.
There will not be any extra power loss.
The important thing is the "connections" ( valid for copper also)
You will need a...
Type: Posts; User: majmudar
If you select the right cross section of cable, it makes no difference.
There will not be any extra power loss.
The important thing is the "connections" ( valid for copper also)
You will need a...
You may save the file as a "parasolid" or iges or stp file.
All these can be opened in MCam by selecting 'file type"
I think iges is best for such transfers. It works with all versions of...
If you have 810D on your machine, you can directly select - Milling - then select Engraving. You can then select upto about 90 characters.
I don't know if you can convert text into component...
If you are using too small a diameter of end mill, or low RPM or higher feed, other things being equal you will get this type of finish.
Try using a larger diameter of end mill, at about 4000 or...