Hello, The company I work for has an old IMTA Powermill #600 bridge mill with SELCA controls. The mill functions fine but the spindle motor is for high speed with very little torque. I believe it is...
Type: Posts; User: icecube
Hello, The company I work for has an old IMTA Powermill #600 bridge mill with SELCA controls. The mill functions fine but the spindle motor is for high speed with very little torque. I believe it is...
I'm mainly cutting wood of different types. I think my cutting area is about 33 x 39. I just got done milling 42 .410 holes .575 deep in MDF for a new spoilboard. These are for threaded brass inserts...
Try this link for a nice looking belt system. I also use twin kevlar belts to drive my "y" axis. No problems so far.
...
You will probably want to vent the gantry right at the motor. They can get warm sometimes. Your build looks good so far. Look foreward to more updates!
I have an old cnc wood router I built with ideas from this site several years ago. It worked ok till now. I run master5(from art before mach); using stepperworld's sp-3 and little japan servo...
sp-3 is a stepper controller from stepperworld.com . Very low end but they do have some better products.
I swapped the wiring from the sp-3 to the motors. After doing this then z had holding torque and y did not.
Hello, I have a home brew cnc router that worked fine till just recently. The z axis will not move down while running a program. The axis moves with the jog keys ok. I have noticed there is no...
Sorry it took so long to reply. Family reunion time. Thanks for all the good info. I tried several times to generate g-code with ACE with no luck. Dont know why. I remember CamBam from a long time...
I am using turbocad v9.2. Not quite the Autocad capability. Thanks for the trace. I remember reading other posts about inkscape. I downloaded it and will give it a go. Do I just explode the trace...
Hello again. I traced my picture in cad using polyline tool. Joined all lines, exploded twice and saved final as dxf v12. The preview in ACE looks ok but will not convert. I think it is because ACE...
Thanks. Kind of what I had in mind. I've never tried it before. No better way to learn than to jump in.
I hope i'm in the right forum for this question. My wife bought 2 screen doors for the screenroom I built. The corners of the doors have some fretwork on them. Now she has decided she wants this same...
What about an interface between the 3 drives and the paralell port. Does someone make a board for this?
Has anyone heard of an IMS IB462 stepper drive. What would it take to control these for home brew CNC.