We just rebuilt our vf8 ct 40 taper spindle its been making noise ever since I bought the mill in February of last year , we don't run very high rpm's but use some large face cutter's 5-6" so we...
Type: Posts; User: coxfive
We just rebuilt our vf8 ct 40 taper spindle its been making noise ever since I bought the mill in February of last year , we don't run very high rpm's but use some large face cutter's 5-6" so we...
WE HAVE PURCHASED A 6' GANTRY FROM PP AND WENT WITH THE 12' 3 1/2 SD RAILS THE ONLY PROBLEM WE HAD WAS GETTING THE RAILS TOOK FOREVER , WE ARE A STEEL FAB AND CNC MACHINE SHOP FROM THE 80'S ALL OF...
It seems like There are a few on here that run these with no problems I need to get mine going as well but other priorities have temporarily pulled me away from this ,mainly a learning curve I think...
thanks Atmosports we will try this as soon as we can and see what happens
Garry Cox
well now a new problem the back up battery died 9v and it's telling me to change time and date,done now it's saying to reload NCK with 6 options so I didn't have time to do this so I just shut it...
ATMOSPORTS
we have the manuals and still have trouble but I will get my cnc guy to use these procedures and see if that helps because i'm not sure where we are at this point mainly frustrated .but I...
thanks it would be appreciated
Garry
Mike I'll call you tomorrow when I can get to the machine and power it up ,I'm sick of machines setting around unused with so much potential.
Mike if you need any info on the manuals we have them for the HIT 15 S I would assume the Siemens Sinumerik 840c is the same ,just let me know maybe if one of us gets ours going we could help the...
Mike, I was hoping you finally got this going, we have all the manuals that go with it but you can program it to the "T" per manual and still get different results ,it looks simple as anything when...
Mike did you figure the 840c out because we bought 2 of these with the same controls ,we have haas ,bridgeport dx32,clausing fanuc,with no troubles programing problems but what you described is our...
i believe the cables on the x axis motor need to come off because i had a guy working for me that did'ntremove them and we could not get the cabinet off and the wires/plug got messed up ,You might...
I have purchased a hyundai HITS15 cnc lathe about a 2000 yr mod siemens sunmerik control and need a post processor for bobcad v27 any help would be appreciated
well we have figured out the problem .so thanks
our issues with the tc1,it was running fine ,edited a program moved x axis over .125 reloaded but the tc1 is now having a error message of reload carrousel, when you try to reload under "Tool Change"...