Search:

So I've repeatedly ran this G-code, and it always causes my mill to seize up during the rapid traverse in the y-direction, causing me to loose exactly 8.9mm of steps every single time.

I tried...

So I've repeatedly ran this G-code, and it always causes my mill to seize up during the rapid traverse in the y-direction, causing me to loose exactly 8.9mm of steps every single time.

I tried...

Hi,
I've been running Mach3 Mill using g-code generated with Catia V5 via a fanuc_16_mill3 post.
Everything has been running well, until i tried to using circular interpolation along the XZ plane...

Hi,
When i run my G-code that I generate with Catia V5 (using the Fanuc16_Mill3 post). I get this arc differs error which i don't understand. I've machined many things so far with this combination...

So I finally figured out how to make Catia output code which runs nicely on my Wabeco 3-axis mill. It runs on MACH 3

I use the Fanuc_16m_mill3.dmp post processor and the ICAM_MILL_MM.pptable as...

I'm having problems generating G-Code with Catia V5.
There are choices in Options/Machining, and some in the NC generation dialog, but i don't know which to choose.

I used to use MasterCAM X,...

Does anyone know of any tutorials for machining in Catia V5?
I'm willing to pay if it'll be a good tutorial.
thanks

Have you resolved this issue? I'm having the same problem
thanks

They explain how to get it through a 32" door.

But to bring it down a 30" staircase, i would have to remove the whole table, ball bearings etc... voiding the warranty and potentially breaking...

I'd love the Tormach, unfortunately it won't fit through the door and down the stairs.

As for the Taig... is it for real that it weighs 85lbs??? I thought the wabeco was extremely light weight...

Can anyone comment on the Wabeco CNC mills that i found on mdaprecision.com I'd be looking to buy the F1210 High Speed Spindle version

I'm thinking of buying one, but i'd like to hear some...

That's a good question!

I'm awaiting an answer by your side...

Hi,

I'm looking to buy a CNC mill, for small aluminum work and maybe easy to machine stainless. I would like to get it CNC ready, so i don't have to go through the trouble of retrofitting... it...