Ok I will check this in the morning thanks
Type: Posts; User: JWHMILLWORK429
Ok I will check this in the morning thanks
The spindle is a 4 pole 380volt . I believe everything that need changed is in the Syntec controller at 400hz it’s only getting 5volts. I changed the VFD to 800hz but I don’t know where to test the...
I will check in the morning but I believe its says 400hz at 5 volts also the hsd spindle is 400hz 24000 I went threw all this with HSD and send pictures and everything is good on that end. I...
we found a bare wire grounding out sorry I dont get on here to much to update
Hi we have 2 Yimmings chinese Syntec CNC machines in our shop the issue we have is getting the RPM past 12000 we have HSD spindle everything is wired correctly according to HSD. So I have a Delta...
I have the same issue only spinning12000
We have a IS510 we just purchased and it works great very simplw
Hi I have a Syntec controller and I am getting a error on the x axis 21.1
But the x axis is not moving it is moving in Y so I think there is a connection issue?
Hi I am looking for Syntec 6ma post with multi drill for mozaik thanks .
Hi I recently had 2 codes MLS94 MLS 95 what does this mean?