Search:

Hello all,
Looking for help programming a slot with live tool on Doosan Lynx 220lysc lathe. Will the following code work?
N1(.040 DIAM. EM)
M35
G0G40T0101
G97S3000M3P12
G28U0M7
X1.1038 C0 ...

We use Haas Indexers on our Machines. We made our own G code (g15) to control indexer through program. We will call G15 A90.0 for a 90 degree rotation. Below is the macro program.

O9015(INDEX...

We are a full service machine shop located in central New Hampshire. Please check us out at Jorgensen Tool & Stamping | Tool & Die Shop, Precision Metal Stamping Manufacturer, CNC Machine Shop |...

I agree with zavateandu, there are proximity sensors at the left end of machine (spindle tube) that tell the machine whether or not the spindle is in clamp or unclamp position. Replaced one last year...

Unfortunately, I no longer work at same company, so I do not have access to that software. If you contact Yuasa directly, they will supply you with a copy of the software. The software is old, and...

The closest I found was Z200CD12, which is D4(D6) Tool Steel.
Good Luck

Here is a macro we used a while back(8YRS) for a job. It worked on a i-80 Yasnac control. I have not tried it on one of our Fanucs. May need to be tweeked. You can change values depending on size of...

Here is a macro we use on all of our Fanuc controls. You need to position to center of feature, and move down to desired depth. This macro does "1" shot holes and also will spiral. You can also loop...

We have several Haas Indexers, but use them on non- Haas machines. we have to use the control boxes with them. If the control box is not hooked up to the indexer, we get a high load alarm. Sounds...

We have had very good luck with Doosan machines. They are hard to beat price wise, and hold tolerances very well(.0002). They come with TSC standard, but I believe the chip conveyors are extra....

We have had very good luck with HPI or Pioneer tool holders. High quality balanced holders for a great price. Do not forget to add the price of retention knobs(pull studs) for each of your holders.

Fun and easy to learn. I used the built in tutorials to learn beginner stuff, and used You Tube for a lot of other tutorials.

We have an older My2 we are looking to part out, I believe the power supply is still good. Yasnac I-80 control. We are located in central NH.

You can download a free print screen utility called Gadwin Print Screen, I use it for similiar reasons.

We use a vacuum plate for parts that are 1/4" thick and under. These are not the expensive ones requiring a vacuum pump. It runs on compressed air creating a venturi effect. You use a bigger aluminum...

Never mind, it was a battery alarm.
Thanks.

Hello,
Can anyone help me out? We have an older Hitachi H-Cut 203M with sp150 Fanuc control, It has a Bal2 alarm and will not run. Any help would be greatly appreciated.
Thanks,
Marc

It is the same e-mail address, It keeps saying undeliverable.

I tried sending you an e-mail it keeps coming back to me as undeliverable.

We have a similiar machine here. I can probably help you out. Let me know what you need. [email protected]

Never Mind We Found Our Copy. Thanks.

I Was Wondering If Anybody Can Help Me Out. We Have An Older Matsuura Mc-1000v Machine Center With A Fanuc 6m Control. The Problem We Are Experiencing Is There Doesn't Seem To Be A Shift Key On The...

Hi, I was wondering if anybody out there is using a UDNC-100 controller for their yuasa indexer, and if they have the Yuasa terminal software to program the controller. We have misplaced our software...

Hi, I was wondering if anybody else out there is using a udnc-100 controller for a Yuasa indexing head. I am looking for the software to program the controller. Yuasa terminal software v1.10. If...

we have an older matsura m760 with a yasnac mx3 control, I am looking to use a g65 user macro, but that code is an option on the machine. would like to know if anybody can tell me which parameter...

we have an older matsura with a yasnac mx3 control, I am looking to use a g65 user macro, but that code is an option on the machine. would like to know if anybody can tell me which parameter setting...

Already Tried The Website, But Thanks Anyway.

we have an older matsura with a yasnac mx3 control, I am looking to use a g65 user macro, but that code is an option on the machine. would like to know if anybody can tell me which parameter setting...