Search:

Hello,

I should have said that differently,

I know all controllers have their issues, and I love Mach3.
I had a UCCNC Controller spare, and available, and it was "the cheaper option" for me to...

Thank you very much for this information.
Regarding the machine, all I know is that it was running on Mach 3 software. The serial number was not legible as it was somewhat weather beaten when I got...

Hello,

I acquired a Tormach PCCNC 1100 a year ago, it is an older model, dated 2008, but was never used until last year, running on MACH3. The machine was working, but I decided to upgrade the...

Hello,
I am doing a control system retrofit on my MV-40B
I am located in Trinidad in the Caribbean, and the control system got water damage in shipping.

I have changed all the servomotors and...

Hello,
I am doing a control system retrofit on my MV-40B
I am located in Trinidad in the Caribbean, and the control system got water damage in shipping.

I have changed all the servomotors and...

Hello

I bought the machine in an auction a few years ago.
It was in a good working condition, but I had it in storage for a while.

Attempts to re-commission the machine was unsuccessful, as I...

Hello

I own a Mori Seiki MV 40 b and I am proceeding to retrofit the Fanuc Controls.

I am willing to give away the control boards and components free, just pay shipping, if you are interested....

Hello everyone.

I am not sure how, but I lost all the parameters on my mill. It has been down for a while and maybe the batteries died.

Does anyone know where I can get hold of the parameter...

Hello everyone,

I need a copy of the air circuit diagram for my Mori Seiki MV 40B Machine Center.
I have the maintenance booklet, but the copy is not so great and the diagram is very difficult to...

HEllo,

I have a Mori Seiki MV 40B CNC MAchine Center with Fanuc 10M contorl

I am looking for the Fanuc Operating Manuals

Can you plese assist ?

Hello All,

I recently won a Wasino Model LG-71 Turning Center and a Mori Seiki Model MV-40B CNC Vertical Machining Center at an auction.

They look in good condition, but I have no manuals. I...

Thank you for your help.

I am having another problem however.

It has to do with Electromagnetic Interference.

Whenever the Plasma Torch fires, the GEckos go low indicating a fault.

I have...

Hello,

I am Building a CNC Plasma using MAch 3

My Break out Board is from CNC4PC, and my controllers are Gecko 320's

I have two of them on the Y axis, one as a slave, and one gecko on the x...

Hello
I recently purchased a Hurco MB1 in an auction, and I know it will need retrofitting.
Hurco replied that they have no retrofit for thi product.

Can you please advise what to use.

I want...