Search:

Would anyone have some door handles on a parts machine they would sell me?? One of my machines has the large ones and I cant put the pendant in the normal location because it would hit.

Looking...

shopsmitty,
That's an awesome find! I would like to find another low hour machine like yours! How did you adjust the as you referred ((to drill to commanded depth (.100" shy)) I have the same...

gwood,
I was finally able to film the machine when it has the problem. The Z axis seems to fault out first then the rest. Hopefully you will be able to watch the video from my google photos link...

Greg, Thank you for the suggestions! I will try a warm up PGM and film slow mo!

Happy new Year! Sorry for the delay. The arrow 500 is a ERO B model. It has the a A2100 control with diagram # 91203577. When the machine conks out the head drops and gives alarm 39-41 Axes drive...

Has anyone experienced having their mill cut out in the middle of it running? It often times conks out when the air compressor kicks on. Could there be a component that is sensitive to the voltage...

Good Morning,
I have a older vintage Cincinnati arrow 500 with the A2100 control. The machine wont boot up any more and we have determined that the work station boards Dallas chips battery has...

Hi everyone,
I am working on A 2100 control for a friend and have the chassis out of the machine. I have boot windows to see if the machine passes diagnostic and now want to shut down the control....

Hi Mike, I am also looking for the VFS5 Manual. Could you please send it to me? [email protected]

Hi Everyone,
I have a Cincinnati Hawk 250 A2100 (black drives) that I do not know the history on. I have worked out most problems with it except a spindle motor or drive problem. About 50% of the...

Any of the the communications boards on eBay should work. B and C are later revisions slightly newer than yours. I have owned lots of the Cincinnati CNC machines and I have never had one of these...

Cincinnati Milacron Communication Board PT/NO 1269583C - Cincinnati Arrow 750 | eBay

http://www.cnczone.com/forums/attachment.php?attachmentid=371934&stc=1

I have had this error for as long as I have owned this lathe. It is just a nuisance to see every time the machine boots up. I...

This is the board.http://www.cnczone.com/forums/attachment.php?attachmentid=369378&stc=1

Hi every one,
I am in need of settings for a Real Time Board 3-424-2348A02 The battery went dead on a friends machine. And I am trying to put the BIOS back in but dont have the info backed up for...

Thank you Chopsmitty! That was the fix!!

I have an Arrow 1000 with the black Cincinnati Milacron drives. The problem happens when I turn the Spidle on at rpm range of 3000 or higher. I get the Alarm: Axes Drive ready signal missing and the...