Hey Rod, thanks for the suggestion, something I'll probably look at in the future when I build a new plasma table, right now I'll be using my existing CNC router which works perfect...
Type: Posts; User: cnc2015
Hey Rod, thanks for the suggestion, something I'll probably look at in the future when I build a new plasma table, right now I'll be using my existing CNC router which works perfect...
Hey guys! haven't posted in a long time!
Looking any recommendation on a torch height controller.
My setup:
Windows PC
Mach3
C11 BOB
Hey Jeff, the round rails so far are doing a great job, I've machined a lot of aluminium in the past couple of months, 1/16, 1/8 and 1/4" and I'm always within 5 thousands.
I got it from...
The helical rack and pinion are doing a great job, absolutely no regrets!!
Thanks man! I'm using Mach3 and Bobcat cam
Sent from my Studio 5.0LTE using Tapatalk
If I would of had the space it would have been a 12' table lol
As for the lathe, possible but way to complicated! but! you could and a 4th axis like in the picture.
315416
I got the machine fired up over the weekend and did some fine tuning in the last couple of day, except for a few minor glitches and two wires reversed the start up went very well and I'm extremely...
Had a minor set back this weekend, the pulley system design wasn't working very well or not to my liking so I machined some flange bearing.
The flanges are double sided, I have (2) 12mm sealed...
So far the total cost to build this machine is $5265.00 Canadian, I still have a few odds and ends to buy like the limit switches and so on
Hey man, have a look at my very first post in this thread, there is a drawing of the overall dimensions and also the info: on the steel I used
Thanks guys for the great comments! she looks good, now I just need to get to run as well as it looks ;)
Got the spindle and VFD in Wednesday afternoon, mounted it to the Z axis yesterday, should have the spindle running today.
http://www.cnczone.com/forums/attachment.php?attachmentid=313876&stc=1
...
Been a crazy week, all kind of unexpected interruptions that slowed me down on finishing the machine, but it's coming along, slower that I would like but it can't be rushed either!
Got the tool...
Starting to see the light at the end of the tunnel lol
Slapped some paint on the machine over the weekend, still have to re-assemble the cnc, wire up everything, make the side panels, front...
I got two out of three pulley brackets made up, little more work than I anticipated.
Machined up the shoulder bolts
http://www.cnczone.com/forums/attachment.php?attachmentid=311190&stc=1
1/2"...
Thanks man!
Good point! you are right, the melting point is fairly low, back to the drawing board!
Got lucky with the panel, found one on Ebay for 200.00
I might use a sheet of 1" black HDPE polyethylene for the working surface but still debating.
Been slow going for the past few weeks but I should be back on track in the next couple of weeks!
Got the control panel completed and tested, very happy with the Leadshine drivers and C11 board.
...
Don't have a problem here, I only hear the bearing on the rail when I move the gantry.
Are your axis's moving easily or is there a bit of drag? the downside of the profile rails is if you don't...
Thanks man!
I got most of my parts from oversea's also, saved a lot of money even though it was in US dollars, I'm sitting at a little over 4,000.00 Canadian right now, that's around 2800.00 USD ...
Got some work done in the past week! Gantry is all welded up, the Y and Z axis is in place, got the drag chain tray and chain installed on the X. hoping to get the timing pulley assembly built and...
I'm looking at the C11 board, does anyone have a C11 board/Leadshine set up, and if so do you have any issues ?
Looks like a good board but it's way out of my price range.
I having a hard time picking out a breakout board, any recommendations would be appreciated.
Looking for a board that works well with Mach3 and possibly has a spindle control on it and of course...
I ordered 4 Leadshine DM870 last night based on Leadshine's recommendation, got them for 95.00 US ea. instead of 135.00 very happy with that! they look to be much more superior than the Gecko's ...
Thanks guys for the feedback, I going to pull the trigger on the leadshine drivers.
I take it you're not a fan of gecko ?
Got the table in it final resting spot, I used a self levelling laser to get the table levelled out, got the gantry in place, but I still have to fine tune it before final welds.
I'm so far very...
Got some work done on the gantry side supports yesterday! Should have them welded up today. Hope to have the gantry in place by tomorrow.
305122 305124 305126 305128 305130