Hello,
I have a postprocessor(.gpp file) which generate me the job name always in format bello:
(---------------------)
(---JOB-NAME---)
(---------------------)
Is there any solution to...
Type: Posts; User: claudiu220405
Hello,
I have a postprocessor(.gpp file) which generate me the job name always in format bello:
(---------------------)
(---JOB-NAME---)
(---------------------)
Is there any solution to...
Am scris mai jos ca am SP2HF3, si nu este rezolvata problema.
Not resolved with SP2HF3.
Thank you!
Nobody with an aswer about this?
Thank you!
Ok, I understand this think and also I knew it.
Is there any posibility to disable remember last position in peration window when I use save and copy?
Thank you!
SOLVED!!!
At the begining of the operations, i added "Machine Setup", and now everything is working good!
Hope I helped somebody!
Also is any solution to disable last position in operation when using save cand copy?
Thank you.
Hello,
I installed SolidCam 2016 SP2HF3, and having not this problem anymore.
What I can not resolve is that when I generate the g-code, the name of the codument is without spaces.
What can I do...
Hello,
I've allready made this checks and split name as file name is disabled.
I think is a bug of SP0.
I will try SP2 and see if the problem is solved.
I will come back with answer.
Thank...
Hello,
I installed Solidcam 2016 SP0 and I have next problems:
1.When generate multiple split operations, it generate: filename-1-1, filename-1-2, and so on, untill now it was filename-1,...
Salut,
Nu ai pentru ce.
Daca ai si tu postprocesoare te rog sa imi trimiti si mie pe [email protected]
P.S:Te-a ajutat acel pp?
Astept raspuns.
Ms.
Hello,
I have for DMU80.
It could work with DMU65.
Make a try.
Have a great day!
Hello,
Thanks for answers.
As imachining-6061 said, it did not work, I do not know why.
I finaly found a solution, from machine setup I modify the pp from TURNING to MILL-TURN.
In this way it...
Hello,
Nobody can give an answer?
is it impossible to do in SolidCam?
Hello,
I have a problem or maby I do not know.
When I make a face turn or cut off operation, even if I extend the exit always Solidcam simulate the final position at X-0.8 for a tool with R0.4,...
Hello,
I want to modify a turning postprocessor, and at tool info, if I put to read tool_diameter for drill, it always generate with 0 value.
Also thread tool and tap have the same tool_type, how...
Hello,
I need help for a problem.
I have a part in turning mode, that have 2 clamps.
How can I put the second origin for clamp 2, that I can have a good simulation for the other side?
For...
Hello,
I finaly made it work.
I installed SW2014 SP4 and SolidCam 2015 SP3.
Any other methods do not work.
Hope I helped somebody.
Have a great day everyone.
This is also a good idea, but what can I do to solidcam create automaticaly MAC1 position 1 and MAC1 position 2, every time, it create MAC1 position 1, MAC2 position 1.
I tryed to modify dhe 2 in 1,...
Hello,
I have a postprocessor and I want to make some modifications:
1.When I create new origin i have MAC 1(1- Position), then MAC 2(1-Position), and so on.
When I generate the Gcode, it...
Hello,
Thanks for answer.
It works now. I didn't selected any tool, and when I tryed to save, it didn't saved it.
Thanks again.
Have a nice day
Hello,
Thanks for answer.
I tryed to save it, but after saving, there is nothing in settings template when I check profile.
I found some templates and now I can check the box from settings, but...
Hello,
Is there any possibility to change the defaults leads in and lead out for solidcam 2015?
I always have lead in and lead out arc with different datas, and I want to have none like in old...
Hello,
Still the same problem.
What I saw is when I open a CAM part and then close that CAM part, there is starting the problem.
First time when I want to start a new milling process, the CAD...
I launch SolidCam from Solidworks.
I don't like the option of internal.
It's the same problem even with internal, because every time when I chose Mill option, solidworks part is closed and then I...
Before this I had SolidCam 2013 with SW2014, and having no problem, but from few day ago when I get SolidCam 2015, I had this problem.
I have New CAM Part definition set up on External.
Even if I...
SolidWorks 2014 SP1 with Solidcam 2015 SP1
SolidCam 2015
I work with Solidcam for 7 years, and I have few knowldege, has I mentioned, I have the part opened, but solidcam close it and then I get that error.
Thanks for answer anyway.
Greetings.
Hello guys,
I have just got SolidCam 2015 and I have a problem.
If I have a part opened and choose from Solidcam New->Milling, solidcam close the part and then I have this error "to create a new...
You can reset all settings from solidcam from START->RUN->REGEDIT->HKEY_CURRENT_USER->Software->and delete Solidcam entryes.
Also if you want to restore your postprocessors data's, you must delete...