403-2001-019 Qty 11
POTTER & BRUMFIELD P/N: K10P-11D15-24
or
Newark P/N: 17M0328 was 67F3893
403-2001-028 Qty 1
POTTER & BRUMFIELD P/N KHAI17D12-24
or
IDEC P/N RY4S-U-DC24V
or
Type: Posts; User: Brock_r
403-2001-019 Qty 11
POTTER & BRUMFIELD P/N: K10P-11D15-24
or
Newark P/N: 17M0328 was 67F3893
403-2001-028 Qty 1
POTTER & BRUMFIELD P/N KHAI17D12-24
or
IDEC P/N RY4S-U-DC24V
or
Contact [email protected] and include the following infomration along with a request to netowrk drive mapping procedure.
1.) Machine Serial No...
2. Installed Software version.. (it can be...
Send a e-mail request to [email protected] and request a copy of FSB1215 "Hawk 5M Advanced CMOS Setup Options"
[email protected]
Contact Hurco USA service and request a copy of Software Bulletin 063A Adding a New TrueType Font.
[email protected]
If I were you, I'd first remove the 3 jaw chuck. Indicate both the Radial and Axial run out of the Spindle nose taper, and the Spindle Face. If this is out, then the head stock may need...
Attached is an example of the Thread Mill block in Ultimax.
Hope this helps you out.
Brock
Send in your request to
[email protected]
Art,
1st off, I find this had to believe "Hurco is being really hard to deal with in getting correct information. "
If your lucky enough to have the WinMax Mill COntrol, there is now a Thread...
Congrats on the new machine.
There is also another option available. It is called a XMP/RMB MEI Retrofit. It is the same system used after the DSP board days and is available from HUSA as a retrofit.
P/N 0073432008 Est $3K...
You are missing the E.O.B. signal to the Hurco Control.
After the remnant is ejected, and the feeder is loading a new
Bar the feeding and feed complete signals need to be set again
During the bar...
Yes,
Send a request to [email protected] requesting the program.
Note it was only designed to run in DOS, Win3, and will run in Win Xp also.
Follow this link to the Hurco Web Page FAQ's
Support FAQs - HOW TO HOOK UP A RS 232 CONNECTION TO A HURCO...
Look at the Z Axis Servo Amp in the main electrical cabinet.
When 1st powered ON, the display shows "bb" under normal conditions.
No Display, check for a blown fuse, or a bad/deffective servo...
I would suggest trying the Hurco web page, select the support tab then FAQ. Enter a search string and see what is returned.
Hurco CNC Machine Tools - Hurco USA - Mills, Lathes, 5-Axis, Superior...
Great sound advise from mfgbydesign.
Refer to the attachment for a Hurco NC Tap, both standard tap and rigid tap from the nc manual.
What Model Dynapath Control is on your Hurco 30D ?
The early one was a Delta 10/20 Serial No's began with 1
After 1995/96 it was a Delta 40/50/60 Series
Is the computer card rack a Silver...
Contact Hurco APplications Support, they should be able to assist in this effort.
317-293-5309
East,
What exactly are you havign difficulty with ?
Do you have any specifics ?
I'm sure BobCad supports their product, have you tried to call them to modify a post for your needs ?
Brock
One thought would be to contact BobCAD or just download the post processor form their web page.
BobCAD-CAM | CAD-CAM Software for CNC Machines including: Mill, Lathe, Wire EDM, Laser, Plasma,...
We have had good success with this device:
KeySpan USA-19HS USB to Serial Adaptor
Contact Hurco Canada
2885 Argentia Road, Unit #5
Mississauga, Ontario L5N8G6
(905) 567-2600
Try this : Open up the head cover, and above the spindle is the unclamp cylinder, the Top Limit switch is stuck ON.
Use a little WD40 and work the plunger up down to free it up.
Check this web site, bet they have something you could use:
http://www.qpmproducts.com/products.htm
Congrats you have discovered the files are in fact the same, with a subtle difference, the ending letter i.e. d would be revision "d" the higher the rev the more recent revision. You may want to...
Check the CD that came with the machine. The programming manuals are on it, along with directions to print them out.
i.e.. CD Drive Letter:\704-0202-004 CD Ass'y\704-0202-111\documents\VM10...
In Auxillary, Storage functions, select the F7 More key until you find the button that says change Program Mask. Press the key and then use the keyboard and type in *.*, or use the Multiply key,...
Great news ! Happy to have been of assistance. :cheers:
The problem is possibly just an Axis balance issue. Depending on the machine configuration, if it has a tri-pack servo, in Manual Mode with the Servo's ON. Press Feed Hold, open the drive cabinet,...
Doing Good and you mate ? How is Tony and Dave doing ?