Picked up a machine that was DOA. Seem to have found the problem and have it up and running now after replacing the CRT Screen with an old monitor I had laying around. Verified the servos and drives...
Type: Posts; User: Cleschak
Picked up a machine that was DOA. Seem to have found the problem and have it up and running now after replacing the CRT Screen with an old monitor I had laying around. Verified the servos and drives...
Have an Arrow 1250 that has recently had an issue that has progressively gotten worse.
When you start the spindle, or change the spindle speeds (sometimes, not always) the spindle will ramp up...
Trying to get an idea about how feasible this would be.. I have already made a prototype on my own, but cant make them in qty fast enough with my capabilities to be worth while..
Looking for a...
Do you mean the main electrical cabinet? There was no extra in the controller cabinet but I did not open up the main cabinet in a while so I cannot recall. I will check later. (couldn't hurt to have...
You can add auxiliary views in the 2d drawing to get what you need and then export as a DXF.
You need to draw a line at the angle you want for your aux view, then select it to project the view.
The cord fixed the problem.. Now the only problem is finding a replacement coiled cord.
The one I took off is an RJ12 6P6C with straight through wiring (6 conductor vs the typical phone cord that...
Will do, Thanks!
Well, things are slow around the shop and I am trying to catch up on some machine maintenance between jobs now. We have a fairly new Haas VF-5 that we bought brand new in 2007. At the time of...