When i start the machine the following is on the screen:
0453 - 03
PMC 5B03-01
How can i check the software version?
Type: Posts; User: spikee
When i start the machine the following is on the screen:
0453 - 03
PMC 5B03-01
How can i check the software version?
So I tried it on the machine and 902, 912 i'm able to change. However when i do 917 or 913 it does not stick.
I made a video to show it happening:
Any ideas?
...
I just checked my backup and current settings is this:
902-x1xxxxxx macro A = 01000000
917-xxx1xxxx macro variables 600 = 00000000
912-1xxxxxxx macro executer = 00000000
913-1xxxxxxx macro B...
So far i have only changed 913. But i will try the above parameters. I will leave the x unchanged.
Yeah i did that. but it does not "stick" . I tried just turning it on and off with the putton on the frontpanel and by rebooting the system by means of the mains switch.
Parameter 913 stays at 0x00;...
Hi All,
I have been working on enabling macro B on my Fanuc 0M-C but it seems like it does not "stick".
(param 912 Macro A is also 0x00)
My sequence is as follows:
machine on -> pwe 1 ->...
How does it compare to Materials such as Nanodur?
Hi all, i had been looking for a cnc discord for a while which is more aimed at the hobbyist / semi-pro level. As I was unable to find any except some fragmented specific product ones I have decided...
You are welcome
Hi, I'm the owner of the website. The torque values com from the manufacturer.
My queries are:
1. Does the 8 pole servo have better torque than the equivalent 4 pole servo? -> yes for the same...
Epoxy granite is a material that has been gaining a lot of attention in the DIY CNC community for its ease of use and dampening characteristics. However, there are some drawbacks to using epoxy...
Several months ago I was looking for a spindle for my up and coming CNC machine. I had been drooling at BT30 ATC spindles for a while. And I decided that it was finally time to take the plunge. I...
Hey,
I'm searching for an aluminium supplier in europe that can provide prices of <6 euro per kg for low to medium (10-100kg) quantities.
I have been searching high an low on the internet and...
I like the laser welding idea, but sadly that is not an option.
At the moment i'm looking a off the shelf mill and getting it grinded down 0.2-0.5mm from the shaft.
These endmills are available...
Hello everybody!
I'm new to this cnc stuff and i experienced something new yesterday. The endmill shaft diameter was slightly wider than the cutter diameter.
That sound very weird to me as an...