All is working again, in Win 7 Ultimate using TCP/IP.
The mill saw my Win 7 machine when I ran the net.exe program, it didn't see the Win 10 system.
I have a drive mapped to the Win 7 system...
Type: Posts; User: ab.machineshop
All is working again, in Win 7 Ultimate using TCP/IP.
The mill saw my Win 7 machine when I ran the net.exe program, it didn't see the Win 10 system.
I have a drive mapped to the Win 7 system...
I am setting this up right now. It worked for 12 years on Netbeui and another 3 or so years with TCP/IP connected to a win 10 system, then one day in April it quit.
That would be: NET USE <DRIVE LETTER> <NETWORK SHARE> /user <LOGIN NAME ON SHARE COMPUTER>
Hard to tell without seeing the sketch. Try mirroring the toolpath since you have two that work okay.
Likely not the sketch anyway since it generated the operation.
Could be anything from cutter...
The filename has . decimal points in it, change the name by removing the . and it will load fine.
Solidworks shows a number of faulty faces and many gaps in the model and recommends repairing and...
I did this years ago when I needed to have all of my assembly part drawings converted to AutoCad.
Use a mapping file -- see in help: Mapping Entities When Saving Drawings as .DXF or .DWG Files
Create two separate part files from the single multibody part file by selecting each in the design tree | save body.
Create an assembly | insert each part file | mate the faces and anything else...
In Camworks options your can choose to rotate stock.
Select a 4 axis machine or create one in the database with your machine specifications.
Attached is an iges of the outside contour. The raised area is .500" high and the ends on that section is where the curved back section end.
You can use these planar surfaces to create planes and...
Have a look at the iges.343038 The blended surfaces at each end are put on by the guitar maker, usually on a belt sander. So once I have those features on I will upload.
342774
Iges file in zip
I may try and copy the back surface from the scan to the defeatured model, the scan is actually very good.
Scott
Спам является любой язык.
It's spam
Without too much work you should be able to use the sheet metal commands to create the flatten surface.
Read the help files about sheet metal.
You have your rotary axis set for Z -- change setting in machine tab.
Create a plane above the z+ for unwrapping.
Your model doesn't look like you need to use a wrap feature -- mho
It looks like you used an STL file.