Search:

I understand what you're saying. I'm just unsure because the math doesn't add up. 220 x 2 = 380? Or 380 / 3 = 126.666 or each line??

I'm still confused why a 380v line (L3) would go into this small 220v transformer?

339836

I got a close up picture of the small black transformer. It reads 220v. So then why would one of the lines from the 380v input be running into this small 220v transformer? Wouldn't that be too much...

Thanks Mactec54.

I was talking with an electrician and he suggested a 380v 3 phase 45KVA transformer to run the spindle, vacuum pump, dust collection, and water chiller. We called around and...

The seller says 60Hz is ok. I'm looking into transformers and I'm thinking I'll need 45KVA to run the machine, vacuum pump, and dust collection. The vaccum pump and dust collection both require 380v...

I got an update from the seller with a wiring diagram. They also confirmed the machine is wired to accept AC380V,3 phases, not AC220V,1 phase. Could someone share a diagram on how to setup AC380v 3p...

I just received a machine from fastcnc.com, but I'm not totally sure how to wire it up. I'm in the USA. Any suggestions would be very helpful, thanks!

Here is a link to larger photos:...

Any updates? I just purchased a similar machine and I'm curious how you wired your machine up. Thanks for sharing your experience!