I forget to write, that short programs (max 2k lines) runs flawlessly with DNC.
Type: Posts; User: five7
I forget to write, that short programs (max 2k lines) runs flawlessly with DNC.
Hey Guys,
I just started using a Romi D1000 with the oi-mf plus controller. Ftp file transfer working, i can copy programs from my pc to the controller. I making custom parts with cam, so many times...
Hi, thanks your answer. I have some more questions related the dmu50, maybe you know the answers/solvings. In the menu, where the lubrication signal can be initiated manually, there is a table clamp...
It means, that my postprocessor give out the drilling cycle using only G0 and G1. I use Gpost. Regards
It work in iso, but in certain format only.What controller? In tnc 430 N10 G200 Q200=2 Q201=-20 Q206=150 Q202=5
Q210=0 Q203=+0 Q204=50 Q211=0 * You need to fill all the drilling parameters in the...
Hi. My company bought this machine 4 months ago. I filled the rear tanks with lubricants (one with cl46 oil, one with lithium grease, hydraulic tank was full already). 4 months elapsed, but the...
If you move the spindle with a tool in etc with the arm in spindle area, it will dont hesitate to rip off te toolchanger arm, so bee careful, do the steps slovly. Sometimes the arm out step followed...
Hi. In manual mode goto service menu type "FD" hit first enter then F1. Toolchange recovery menu appears. First activate tc service on (1). If the changer arm is in the spindle area, then you need...
Hi
I have manual for DMC100V with dialog112. I work with such a machine from 5years ago. What information you need?
Hi all
I need programming manual for the mentioned controller. I have the tnc prog manual for hdh 426/430, i need the machine specific prog manual only (if exist). Besides that would be good, if...