Presently running an indexer that will turn 18" by 128" wood columns and a Joe CNC 4by4. Want to replace the 4by4 with a beefer machine that will handle non ferious metals better.
I am...
Type: Posts; User: Art Ransom
Presently running an indexer that will turn 18" by 128" wood columns and a Joe CNC 4by4. Want to replace the 4by4 with a beefer machine that will handle non ferious metals better.
I am...
Big Tex is in North Dallas an I am in Lancaster on the south edge Dallas at I35E and I20. Glad to help and have a 4by4 router and 18" by 10' four axis indexer. Running Mach 3. Feel free to call 7...
After all this time I am going to try the rolamite as the driving mechanism on a 4' by 4' laser engraver. The laser gantry will be under 5 lbs and 800 IPM. Probably use a rubber based flat belt...
Finally got my Hybred up and running. I have also implemeted Thomas's Z Zero feature. IT IS REALLY FANTASTIC!!!!!!! Here is how it works.
At power up you do a Reference All. This sets the...
Been an extremly happy user fo about a year. Here is a enhancementI would like to see.
http://legacywoodworking.com/Videos/ShopTime/RackPinion/RackPinion.cfm
Legacy has promiced the software...
I would like to be able to get bulk timing belt material and make my own belts. How can I splice them?
Need sugestions on material for band, I will need one 13'. I am thinking 1" wide.
I sent an email to Dr Slocum at MIT and I will post any reply. I suspect that the rolamite is a device that didn't live up to the hype and is just one of those interesting footnotes in history. ...
I suspect that there is a misunderstanding in my interest in the rolamite. I was looking at it as a replacement for the rack and pinion drive. Your MacroFlexure would definately give the .01" of...
Went to your site and found it interesting. On your roller track if you moved the idlers/guides(?) closer togeather wouldn't you end up with a romalite?
I believe we have beat the theorical horse enough! How about some REAL WORLD applications and data? Did a search of the Society of Mechanical Engineering on rolamite gets no hits. Other than the...
WHERE IS THE BEEF? Anyone have any real world experience with these things that can be applied to a indexer?
Finally my site is back up, www.turningaround.org. On it is a section on my indexer. Legacy has just annouced 2 machines at 33K and 48K that are not quite as large as mine. ...
Eric, I am planning on building my second indexer. As with the original the x will be 128", Z will be reduced to 7", Y will be expanded to 50" and A will stay at 18". This setup will allow me to...
The simplecity is unreal. What I was interested was the possible use of the rolamite concept in controling axis movement and gear reduction. The band becomes the critical factor in being able to...
Looking for router frame to rebuild. Prefer 4' by 4' or better don't care about electronics as I will use SmothStepper and Mach3. Weight not to excede 800 lbs and will ship to Dallas,Texas area,...
see http://www.rexresearch.com/wilkes/1wilkes.htm for details of the rolamite. This seems to be a much easier and accurate system of motion control. Anyone have experience with it?
I got lucky and tested the wizards for Rich. They work great and have saved me a lot of effort.
I want to increse the ratio on a rotary axis to range between 20:1 and 50:1. I will be using stock up to 100 lbs at RPM up to 50 RPM in lathe mode and 5 RPM in indexer mode. Using a jack shaft and...
Rich has setup a web site to handle purchase of his wizards.
http://www.wizardsbyrich.embarqspace.com:80/
Rich strikes again! He has written a rounding wizard. It will also do tapering. This a...
No Rich will charge but price hasen't been set. He is giong to add more and I have encourged him to do a suite like New Fangle Solutions except for the indexer. Legacy charges $100 for their...
For those running an indexer here is a email of Rich, [email protected], who has written 2 wizards so far for the indexer. I have been working with both and they are great. Rich is a retired...
yes that is it!
I am doing a table base from wood. Part of it is a 19" sphere with a 17" spherical viod. I want to mill three 8" holes centered on the equator. In order for them to look round they will have to be...
I use a router on my indxer which doesen't help in your case. Also when turning manually I adjust speed so it feels right. Tear out is mainly a combunation of speed, depth of cut and tool...
A common problem is too much pressure beng applied by the tail stock causing the material to bend. From the pictures it appears that the maerial is whipping/flexing. I have turned several bats on...
Here is the fixture and holder I made. Fixture is 3" square and 1" thick counting the plastic base. Base is recesed 1/8" back from edge in case there is sawdust so the metal will fit tight against...
I am on the S edge of Dallas. Running DIY indexer that can route 20" by 128" and turn columns 18" by 10' running MACH3.
The MachBlue setup on Mach site has a different Program Run screen from the one on CNCZone. Duh!
When I go to the link on CNCZone it doesen't download BlueProbeVer3.zip but...
Went through all the install steps and confirmed that all the files were in the right place. Running Mach 3 version 2.60 and port 2 pin 3 active low. When I touch plate to tool the LED for port 2...