Search:

I'm not exactly sure what you mean?

Yes, I've seen I'll probably have to just go for a simple BOB, with all the motor and switch wiring going to it, which then goes to the UC300ETH.

I've been in contact with Balazs already and...

Ah!
+rep ;)

So originally I was using a USB Motion controller for my new CNC Plasma build. Using 3 axis, Nema23 motors, proximity switches for limits and homing, as well as the Neuron Simplicity THC. It seems...

I have no problem ordering from Hungary. I'm actually in contact with Balazs as well. Its just I need the board as soon as possible. If there is no local supplier, I will just order from Hungary.

Hi All,

Does anyone know of a South African supplier of the UC300ETH-5LPT or even the ESS controller boards?

Preferably not having to order from overseas.

Thanks coherent, that's exactly what I was considering, setting it up as an e-stop.

Thanks

We're using Ohmic sensing for initial height sense. I used to use floating head, but decided to move to Ohmic.

But I don't see how this affects the magnetic breakaway. This is just as a safety...

I'm currently putting together a plasma machine, and we're including a magnetic breakaway to protect the torch. Machine is run off a laptop running Mach3, using a USB Smoothstepper.

This is my...

Thanks for the reply.

The voltage reading on the THC display seems to be correct. It reads around 100V at start of cut, but then as it lifts to about 20mm above the plate, reads about 170V. The...

Hi,

Do you use a floating head or Ohmic sensing? How do you reference the torch-to-plate? If floating head, could be a connection issue.
Does it have the same problem when the THC is not active?

Hi,

I have a CNC Plasma machine which I'm refurbishing. It was never commissioned before, so the THC which was installed had not been tested yet. My main problem is that, when the THC is...