Search:

Hello I have a VMC15XT, are these bearings and seals for each axis?

Hello guys, We have a Dyna 3300 with Meldas 50 and have the same error. I can only see the X axis is found, the display shows INITIAL PARAMETER ERROR. The Z axis servo was send to repairs and it was...

Non Folker. Dude you really helped me to make that G-code for a 1/2NPT part. Dude I made some Drawings (3/8 NPT, 1/2 NPT) I can happy share with all of you

Is our cable pin configuration correct?

Man I got that one!, I have operation and maintenance manuals, would you like me to share them with you? another thing Friends I need help with the DNC upload process.
We made a cable with the...

Hello, what software do you use to program the citizen swiss lathes?

Thank you MCImes, I actually input this data on the machine:
Material OD = 16
Positioning PT=1
Machine lenght= 38.15 (35.95mm + 2.2mm tool parting width)
Tooling patten= 1
Cut off speed= 2500...

Hello, I nees some help trying to setup the tools and proggram for a cincom L16 I've posted trying to find some help. Those parameters you are looking for I think I have them. IVAN estás en México?...

Hello, I nees some help trying to setup the tools and proggram for a cincom L16 I've posted trying to find some help. Those parameters you are looking for I think I have them. IVAN estás en México?...

Hello my friends;
We recently bought an old Cincom L16 swiss lathe.
We know about common CNC lathes programming but this Cincom is killing me.
I've read the manual and find the problem that the...

I can get that information, I think the maintenance guy should have it. Can you please tell me how to setup tools? and how do I know which vales input in the screens "MACHINE DATA" "TOOL SETTING"...

Hello; do you know how to setup the tool offsets and the machining data screen? I tried to run a simple program on my L16 Cincom lathe but I get the alarm "T01 CAN´T CYCLE ST 0104"

Nothing can be found in internet :( please fastest1, can you help me?... I will be grateful and help you if you need.

Hello Guyz;

I'm trying to run a Dyna 3300-B lathe with mitsubishi Meldas 50L/50G control. I don't have the operation manual nor the programming manual, PLEASE! can someone help me with the...

2000 rpm for tool steel is to high don't you think?
I am using cobalt drills.

This was the conclusion a friend gave me.
Because my machine is used I have to check the wiring, most of the problems I have had a related to them.
My friend is an electronics engineer and have...

I have the integrated controller from mikini, when it happens the alarm doesn't make noise and it does not active the e-stop, I got a problem when I imported the machine, the light tree got broken...

The other problem is about the spindle real spindle speed and Mach 3 display speed, at low speeds <1000 rpm they are not equal.
Mach 3 displays 1000rpm and the control displays 800rpm.

Have you...

For example:
I start a peck drillning operation:
Cobalt drill
Diam: 1/4 "
Speed: 917 rpm
Feed speed: 25 mm/min
Peck drill : 1 mm
Hole dept: 23 mm

This conditions are not too high to stop...

Hello;
I have called Phil, he says the problem is caused because of an overload to the spindle.
But that is not my case, I am not cutting too deep nor fast.
Has this happened to you?

Hello everyone;

I want you to help me on the desicion of what endmill ginding machine to buy.
First of all I am a mechanical Engineer but I have no experience about ginding endmills, I would...

Hello my friends, I own a used Mikini 1610L (model 2008 "demo") and I would like to share experiences with you.
I have had many troubles, in fact I still have (I would like to number all of them)......

My blog: http://www.cnczone.com/forums/blog.php?b=947[/url]

Hello, I have a problem with my mikini 1610L...
The spindle stops during the machining...
You can check my post.
I would like to make a troubleshooting guide and also, finally.... the machine is...

Hello, I am thinking to make upgrades to the mikini 2008 I own, first of all...

Powerdraw bar (the Syil's powerdraw bar looks great but... $$$$, maybe Kurt powerlock)
Tormach tooling system...

Hello, I want own an used Mikini model 2008, it is rightwhat you say. They have little troubles but they are relatively easy to solve. I will post all the troubleshoot I have had... to make finally a...

I read somewhere mastercam is about $4.5K, that is really expensive. I think the Mikini controller has K-cam already installed and ready to be used. I am still waiting to recieve my mill, damn!

I ordered a Mikini on 12/Feb/2010 I am still waiting to see it in real action, just like fillupc.
Now I'm wondering how to make the G-Code using MC9, has anyone done it?.

I am just about to order oneof these machines, Phil has answered all my e-mails. I will post everything about my machine, I hope it is going to be great.