Search:

Thanks everyone that is working/worked on my project, I finished it this morning.

Any help please.451024

Help needed. Can someone convert this? It's the best image I can find, no wording is needed. Thank you in advance.450784

I purcheased a stepper kit from automation technologies, the link is below. It is 4- 5amp 570oz steppers, 4- KL-5056 5.6A 24-50VDC Stepper Motor Drivers, and a 48V/12.5A Power Supply. My question...

I am working on my enclosure and have no clue what size fuses to use and where. Please help. I have a 48V 12.5 amp power supply and a 5V 2 amp power supply. Heres a link to the new...

Yes the new screen worked great. I'll try changing the cv adjustments. Thank you.


Sent from my iPhone using Tapatalk Pro

I have a file I cut with the new uccnc and uc100 set up I bought. The curves are like short lines instead of nice arcs. I dropped the exact file into Mach3 and it cut the arcs the way it was supposed...

I plan on switching to the uccnc software. I can get it to load on my laptop and current control pc with no problems. I want to run it from my surface tablet and it wont load. When I double click...

Thanks Ger. I read that part of the manual 10-15 times and it never clicked til now. Sorry for being a pain in ___.

Everything I've read talks about taking the power off of the hobby cnc board. I already have the power at the superPID. Is all I need is the trigger or do I need to take the power from the board? ...

I currently run a superpid with a Hitachi router. Everything runs as it is supposed to. I would like to have mach start and stop the router. I have been running it with two toggle switches, one...

I asked a bit ago what router people were using. I ended up going with the Hitachi M12VC and precision collet set. The Hitachi was extremely easy to set p with the superPID. I have been laid up so...

I have a super pid that was running a Bosch colt. The router took a crap and I am looking for a new one. I have a $300 dollar budget. I would like the ability to use 1/2" shank bits. I only have...

Just ordered brushes. I'm in the process of switching my wood and aluminum DIY to a all 8020 machine. Switching to a different router or spindle is not an issue. Also I only have 110 power.

I got about a $300 budget. What are your suggestions? 24"x48" 8020 diy build. I have a Super-PID also.

I purchased a machine that came with a feeder. I will not be using it. It does operate, not sure if it is properly or not. All the parts look to be there. Both clamps open and close and the...

Here it is. I wasn't t happy with how it turned out, but the guy that received it absolutely loved it. Thanks for the help.

I run 8.1 and run V-Carve without issues. It is on a HP laptop.

Thank you. For some reason I could not get this thing. i'll try to remember the finished product. It will be water-jetted for a belt buckle.

i need some help. Should be simple.260884

About me: I'm not the brightest. Math can kick my ass very easily. Anyway--- I built a 24"x48" machine. I am happy with my machine and accomplishment of making it on my own. I want to upgrade. ...

Can I use The low voltage power input to trigger other relays also or will that screw with the pid. I want to put my vacuum and air compressor on the panel with the pid stuff. It would not be pulling...

I didn't do either yet. That is why I have wiggle in my x movement. I plan on turning mine around and putting a double nut on both sides, if there is room.

241456

The top piece the bearing is in has slots side to side. You can't see them, they are under the washers. The bottom piece has a big center hole. It is fastened to the board with the...

I used tapered head machine screws and countersink them.

If they are close to the vertical ones and the same size- I had it set up to use a piece shape like an uppercase I, but only ended up using the straight vertical piece.

Thanks pippin

I think that's what the hole is for. Not to sure. Mine was on the top side and got covered by my brackets. I just use a dry lubricant on the rails once in a while. Like liquid Teflon. My machine is...

I learned as I went. I am not a machinist. Just a garage junky.

231060