502916
Type: Posts; User: khaot83
i think below is correct as it was changed later to T02, but difficult to tell without knowing Serial nr.
timer no.011 timer T020 R726.2 LUBRICATION ON TIME 20000
also you can try to hold...
Found this one, but not sure for which controler it is.
Subject Turret Ref. Point in case wrong Position (HIT200-250M)
_ Machine power (Maschine Einschalten)
_ Move the Turret...
i think, you should ask a specific question, so anyone having knowledge can answer it, but like this possibly no one will do ;)
parameter 11 is your problem
10000001
bit 7 must be 1 as well. it is for the absolute encoder. in case it is 0 you will get problems. sometimes it happens when the battery is deployed.
...
Depending on your PMC version, it is not available and / or needs to be programmed byyourself / any PMC programmer...
if you tell me the version i can check if i can find a smililar one in order...
it means your Tailstock Quill is not retracted, or you need to adjust tailstock sensor.
M122 MAIN SPINDLE RIGID TAP ON
M123 MAIN SPINDLE RIGID TAP OFF
M124 SUB SPINDLE RIGID TAP ON
M125 SUB SPINDLE RIGID TAP OFF
M126 MILL SPINDLE RIGID TAP ON
M127 MILL SPINDLE RIGID TAP OFF...
Just for Future info
SKT15/21LMS / Ref. data for 5deg. Index
1. M-code
M116 : Sub spindle orientation (same as M300 position)
M117 : Cancel of M116
M120 : Sub spindle lock pin “In”
M121...
Hi
check if the signals
X10.6 T-ULS TURRET UNCLAMP LS
X10.7 T-CLS TURRET CLAMP LS
are working properly.
also i´m not sure on this turret,
did you find it out?
you need to command depending on which spindle
M3 Sxxx
M122 (main spindle rigid tap mode (maybe on the SKT300 not needed))
M129 Sxxx (rigid tap mode)
G84xxx
G80
M128...
there should be 4 Limit switches (Sensors) infront of the cam box.
i guess left one is for the brake and the 3rd one is homeposition.
maybe the 3rd one is broken or the signal wheel is moved?!
Maybe there is a newer one avaibl but i just have this
%
O9020(M83 T/S PIN UP)
IF[#1000EQ1]GOTO10
#1=#4001
#2=#4006
#3=#4109