OneNCNC can do that easily. I generally use Mcam 2021, but for 4th axis work I use OneCNC because of the ease in programming and the excellent simulation.
Type: Posts; User: 2COOL585
OneNCNC can do that easily. I generally use Mcam 2021, but for 4th axis work I use OneCNC because of the ease in programming and the excellent simulation.
it'd be niceif you mentioned the make of the machine. We run Sodicks. The cutter comp values come from the tech filles that come with the machine. You can't just set these arbitraily, those settings...
hi guys!
Nice Acra step pulley milling machine. Comes without tooling. I'm removing the DRO and the mister unit and the vice. Has a manual oiler. It's going to need a new v belt soon. 208 3 phase...
Sorry, it appears that I'm too dumb to write a usable ad...We're in Duarte, California, 91010
We are a packaging company that makes / repairs parts and machines for our own use. Nice air conditioned shop. No production pressure! We need someone that is great on manual machines, and can do...
you can buy a punch set from McMaster to punch those holes! I've got one, and it works great! It does struggle in SS, but it does cut it. I've probably cut a few hundred holes with my punch...
maybe you'ld want to look at Deltronic pins? Then you can decide how much "force: to use.
you'd be well advised to study electrical noise and how to avoid it. I'm just guessing here, but it sounds like this might be your first rodeo. There's nothing wrong with that, everyone has to start...
there should be a code to release the brake for full fourth work, at least there is on a Haas. M10, engage the brake, M11 brake off.
I am looking for a Dynapath Delta 20 main board, to upgrade our Dyna 10 to drip feed capabilities. Anyone? Thanks! Gregg