Search:

To those that had similar problems connecting the fault and enable between EM-705 and PMDX-126, I let some advices:

1º, I wasn't able to make the Enable work with the PMDX-126 RST/COM outputs....

Hi Guys,

I'm experiencing some difficulty to wire three leadshine EM-705 Enable inputs and Fault outputs in a PMDX-126.

According to EM-705 software manual, Enable inputs could be used to reset...

Dear sfrankland,

I'm new in CAD/CAM designs, and I'm creating a post processor for a BF20. Your parts and assemblies of it in solidworks are perfect. Could I kindly borrow them? If so, could...

Kreutz,

This is the site of the company that produces the drivers, with its specifications:

M880A Stepper Drive - Leadshine Technology Co., Ltd.

As you can see, it works with a...

In the file below are the specifications of a driver to which I must supply 24 - 80 vdc. As you can see, there is a difference between the peak and RMS current. In the case of my motors (3a/phase,...

So, why it's mentioned in the driver? My drivers can be configured to 3a peak (2,1 rms) or 4.2a peak (3 rms). Which one should I use with those motors, if they are 3a DC, as you mention?

So, 3a DC, that means it's a continuous current (RMS)?

Hey guys, I received some motors this week, but I'm having some problems with the specifications that came with them. As you can see in the file, their current is 3a/phase. But it doesn't mention if...

Hey, actually I know the nominal voltage of the motors. I should have told that. The sheets provided with it indicate 5,1v, 3a/phase, resistance of 1,7/phase and inductance of 7/phase. What I'm...

Thanks, I really liked your method. I also prefer a pragmatic solution, specially considering the possible distinction between the motors, hardly took in account by a invariable formula. I only...

Hello, I'm searching for the best formula to calculate, from the data of the stepper motors, the ideal voltage that should be used in it. I have already seen some people using a formula based on the...