Are you slaving the second X axis?
If not, look it up.
Don
Type: Posts; User: DonKes
Are you slaving the second X axis?
If not, look it up.
Don
Could you reveal the brand, supplier or Ebay seller of the product?
Don
It Has to be right --- I saw it on the INTERNET !!!!!!!!!!!!!!!
Don
Magnetic fields attract chips (which generate more magnetic fields).
Don
I used 5% soluable oil and water in a Dyno I built out of a Chrysler fluid coupling unit ( like a torque converter with a manual clutch on the back of it) in about 1959. Probably had a lot of mist in...
I would be sure that your Y axis span on the rollers are 4 feet or more.
Don
About 43 years ago I shared equipment with a guy that had an old hand tracer mill that had an X and Y handle that the operator used trace a part. It was surplus from a high school from many years...
Are these parts available at my local LEGO store?
Don
Temporarily add another thick spoilboard if you need to get closer. Only you know what your mix of usages are.
Don
Rotate the images in your computer before you send them to cnczone.
Don
I can see that you are a tinkerer and builder for building sake, like me.
If I am wrong, please explain your purpose for building and your expected finished product and usage.
Don
Now for a non-political answer !!!
Will it stop you from building your dream if it costs 10% more on 25% of your items?
Don
Read the other conversions.
You might consider a mini mill for the small one.
Don
Will my printer do that?
Don
I have a 8.9" tablet and a 11.6" convertable. The 8.9 is closer to 4:3, but it is still too little to use as a touch pad. Then I got the 11.6 and it is not much taller than the 8.9. It may work for...
Size counts. What do you need?
Don
Measure the run out and complain VIGEROUSLY !!!
Don
Normally open switches need to wired in parallel.
Normally closed switches need to wired in series.
Did you change the wiring?
Don
Don't forget that the epoxy will have a miniscus so you should have the dams wide enough to have it flat wider than you think you need.
Don't ask me how I know. You can guess.
Dib
Mostly it is YOU that determines the accuracy, not the starting machine.
Choices, Choices, Choices
Don
You can't teach people to fish with a very complicated bait setup.
YOu have to make it simple so they can set the hook very soon.
You can set the hook with them by letting them write a line of...
A little compressor and a big tank.
Don
I have this under a G0704
Search Results for concrete mixing at The Home Depot
Don
A big drip tray over plywood.
Don
That looks wimpy. I would go with the bottom tool box.
Don
Warming is a 2 edge sword. Heat makes it cure quicker. I think some experiments in thinning VS complete curing is in order if the mfg can't tell you all about it.
Spreading it evenly helps a lot,...
Sounds like they are not very proud of their prices.
Don
Exactly what I did.
Don
I used a square nut on my 0704, but I don't remember what size. It was rather large.
I chucked the nuts in the lathe and turned then down until they fit in the bottom of the slot.
Don